Hobby Tools & Supplies

Product Info: "Foamboard / Styrofoam Clips Cross (2pcs) - 5mm" Manufacturer MAiM / Front46 Tools Styrofoam Product details Styrofoam Clips; Content: 2 pieces Usable for all kind of foam with the thickness of 5mm! Foamboard not included!Product information Clean with Water only; dont use Aceton for..

..

..

This is a scriber for plastic and resin. This scriber can be used in two ways:- the sharp "blade" end can be used in a manner similar to other scribers, either free-hand or running along a hard edge, such as a ruler. This removes a fine burr of material leaving a clean groove behind. The tip of the ..

Optional extra holder for the Rivet-R Mini rivet tool.This is an optional extra holder for the Rivet-R Mini toolThis package contains only the holder, the washer, the screw and the nut, it is intended as an add-on to the Rivet-R Mini tool and does not include the toothed wheels included in the Rivet..

RIVET-R Mini rivet tool. This is a smaller-diameter riveting tool that can get into tighter spaces.This is an attachment for a standard craft/hobby knife. Use this tool to scribe rivets on plastic, resin and even soft metals. This tool makes round imprints rather than the square imprints made by..

Tool for shaping photo-etched parts, thin aluminium sheet or other malleable materials.. The rolling rods are made of stainless steel. The base is made of an aluminium alloy and is finely carved. The surface received anodizing and sandblasting treatment. In the model making and detailing process, we..

The set square is marked in inches. Small holes at every marker will make it easier to mark dimensions accurately.The square set and protractor are is made from stainless steel.These measuring tools are flexible, which allows them to conform to curved surfaces and thus make it easier to measure..

The set square is marked in millimetres. Small holes at every marker will make it easier to mark dimensions accurately.The square set and protractor are is made from stainless steel.These measuring tools are flexible, which allows them to conform to curved surfaces and thus make it easier to me..

The rule is marked in centimetres (15 centimetres)/millimetres on one edge and inches (6 inches) on the other edge. Small holes at every marker will make it easier to mark dimensions accurately.The rule is made from stainless steel.This rule is flexible, which allows it to conform to curved sur..

This is a scribing tool that scribes two parallel lines in one stroke.The set includes 4 complete scribers (4 blades and 4 holders).The blades can scribe parallel lines with the following distance between lines: 1.25mm (~0.05 in) , 1.5mm (~0.06 in), 1.75mm (~0.07 in) and 2 mm.(~0.08 in). This is per..

This is a scribing tool that scribes two parallel lines in one stroke.The set includes 4 complete scribers (4 blades and 4 holders).The blades can scribe parallel lines with the following distance between lines: 0.33mm (~0.01 in) , 0.5mm (~0.02 in), 0.75mm (~0.03 in) and 1mm.(0.04 in). This is perfe..

Fast-cut saw blade. (12 t/cm - 30 tpi)This saw blade is a medium size blade with larger teeth recommended for rapid cuts. This saw blade can be used to cut plastic, wood and resin and is ideal for removing resin casting blocks. It cuts through resin like a hot knife through butter and if you work wi..

This is a set of extremely fine-pitch saws recommended for use on plastic, wood and resin and even some soft metals.The set does not include the knife handle. The set includes 4 saw blades of the same typeThe blades are made from stainless steel.By removing the outer edge of the handle tab along the..

Optional extra wheels for the RIVET-R MINI rivet tool.This package contains only the scribing wheels, it is intended as an add-on to the Rivet-R MINI tool and does not include the holder and screw included in the Rivet-R MINI package.Use this tool to scribe rivets on plastic, resin and even soft met..

This is a set of very fine-pitch saws recommended for use on plastic, wood and resin and even some soft metals. * The set does not include the knife handle. The set includes 6 saw blades: - 2 Curved saws - these can be run along a ruler like a "contour saw" (pictured below). Two sizes are included ..

Micro-Saw set (22 t/cm - 56 tpi)This is a set of fine-pitch saws recommended for use on plastic, wood and resin and even some soft metals.The set does not include the knife handle.The set includes 6 saw blades:* 2 Curved saws - these can be run along a ruler like a "contour saw" (see the 3rd photo ..

This is a bending tool for photoetched parts. This can bend any commercially available photoetched parts up to a length of 5 cm (approx 2 in). Suitable for all scales and all types of modeling.This tool works on the same principle as the hinged bending brakes that can be found in many metal workshop..

Fine saw blade (24 t/cm - 58 tpi)This is a fine saw blade and is recommended for most model-related cuts. This blade can be used to cut plastic, wood and resin.This saw is inspired by the Japanese Ryoba traditional saws that have teeth on both edges of the blade with the teeth handed, respectively "..

This is a tool that can be used to cut many long items (such as rods or bars) to the same length. Ideal for cutting stanchions, masts, antennas, duckboards, fence posts, etc. The pre-set dimensions range from 0.5 mm to 30 mm in 0.5 mm increments. The cutting gauge is made of stainless steel...

Contour saw (16 t/cm - 40 tpi)This is a set of medium-pitch saws recommended for use on plastic, wood and resin and even some soft metals.The set does not include the knife handle.The set includes 5 saw blades:* 2 Curved saws - these can be run along a ruler as shown in the second photo above. Two ..

Bucksaw & Fine bladeFine saw blade (24 t/cm - 58 tpi)This saw consists of a saw blade that is tensioned and held from both ends, leaving the blade clear to cut through the material.The set contains two frets of photo-etched stainless steel, one containing the multi-part frame and one containing thre..

This is an attachment for the Flip-R5 folding tools. This is an expansion tool for the Flip-R5 (RB-T002)..

This is an attachment for the Flip-R5 folding tools. This is an expansion tool for the Flip-R5 (RB-T002)..