Decalcas

Black decal, featuring a very thick texture with a lot of personality and presence, designed for adding very noticeable roughness. It can even be used to simulate linear carbon fiber in 1/12 scale.Family: Decals Scale: 1/12 Additional scales: 1/9;1/8;1/6 Reference: DCL-PAT012 Item: Texturized patt..

Pneumatic hose joints to detail the brake, cooling, hydraulic, fuel systems... of your kits at any scale. Executed with the usual precision and realism of Decalcas, parts with different angles of rotation of the tube are included so that they can be perfectly adapted to the system you are reproducin..

Pneumatic hose joints to detail the brake, cooling, hydraulic, fuel systems of your kits at any scale. Executed with the usual precision and realism of Decalcas, parts with different angles of rotation of the tube are included so that they can be perfectly adapted to the system you are reproducing. ..

Pneumatic hose joints to detail the brake, cooling, hydraulic, fuel systems... of your kits at any scale. Executed with the usual precision and realism of Decalcas, parts with different angles of rotation of the tube are included so that they can be perfectly adapted to the system you are reproducin..

Decalcas: Marking / livery 1/12 scale - Yamaha YZR500 sponsored by Dainese #1 - Kenny Roberts (US) - Motorcycle World Championship 1979 - water slide decals manufactured with digital technology -for Tamiya references TAM14001 and TAM14026..

WindshieldFamily: Vacuum formed parts Scale: 1/12 Reference: DCL-VAC003 Item: Yamaha YZR-M1 To be used with: Tamiya references TAM14117, TAM14119 and TAM14120..

WindshieldFamily: Vacuum formed parts Scale: 1/12 Reference: DCL-VAC014 Item: Yamaha YZF-R1M Includes: vacuum formed parts To be used with: Tamiya references TAM14133, HC-14133 and TMY14133..

Tyre sidewall white chalk marking decals in 1/12 scale: An extensive decal sheet with a variety of white numbers and markings such as those commonly found on Formula 1 and GTs car tires. Includes inscriptions such as "practice", "set", "test" Family: Logotypes Scale: 1/12 Reference: DCL-LOG009 Item:..

Set of toggle switches with protection caps in 1/12 scale. Includes 20 switches in total, 10 with closed lids, and another 10 with open lids.Family: Detail Scale: 1/12 Reference: DCL-PAR019 Item: Toggle switch with guard Includes: resin parts Parts: 10 + 10 units..

Fairing windshield and anti-slip fuel tank pads for the Suzuki GSX-RR, made of 0.2mm thick transparent laminated material that replaces the transparent plastic parts of the kit, and decals with a 3D effect. The windshield is already die-cut, adjusting to the model without the need of further modific..

Upgrade set for the Suzuki Ecstar GSX-RR by Tamiya, with which to replace parts such as the rear brake caliper and disc, rear wheel axle and nut, chain tensioner, brake and gear change pedals, kickstand brackets, add the antennas to the side camera, and replace the fastening screws of the parts of t..

Set of parts for replacing the chain assembly of the Tamiya Suzuki GSX-RR in 1/12 scale. It includes the pinion, chainring, fixing nuts, chain and closing link, which facilitates the paint job. The extreme detail with which this set is designed and manufactured allows for greater realism to the mode..

Pre-cut paint mask in repositionable low-adherence paper, which fits over the different parts of the Tamiya model to be protected in order to carry out the correct painting process. With the Decalcas mask it is no longer necessary to spend time cutting the complicated silhouettes of the mask provide..

Short springs with shock absorber reproduced at 1/12 scale, similar to those used in competition for mounting and adjusting mufflers and exhaust pipe components. Made in resin by 3D printing, they reproduce all the details, such as the conical finish of the spring, the rubber that protects it, and t..

Short springs reproduced at 1/12 scale, similar to those used in competition for mounting and adjusting mufflers and exhaust pipe components. Made in resin by 3D printing, they reproduce all the details, such as the conical finish of the spring and the "U" anchors that are welded on the exhausts, so..

Quick disconnect coupler for hydraulic systems at 1/12 scale, like those used for draining oil on Moto GP bikes. Made in resin by means of 3D printing with the usual quality of DECALCAS products, so that you only have to paint and glue on your scale model. These scale quick disconnect coupler reprod..

Decals for the decoration of the Porsche 934 RSR used in the last championship race of the SCCA Trans-American Championship held in 1976 at the Canadian circuit of Trois-Rivieres, where George Follmer with the number #16 not only won the race, but also was crowned the winner of the championship. We ..

Complete wheel set including BBS rims with Pilot Sport tires in 1/24 scale, along with air valves and hubs with central nut to detail the Nunu Porsche 911 RSR GT3 Le Mans 2018 kit. This set allows you to replace the rims and tires of the kit, which lack detail and are out of scale. Decalcas has paid..

Long springs with shock absorber reproduced at 1/12 scale, similar to those used in competition for mounting and adjusting mufflers and exhaust pipe components. Made in resin by 3D printing, they reproduce all the details, such as the conical finish of the spring, the rubber that protects it, and th..

Long springs reproduced at 1/12 scale, similar to those used in competition for mounting and adjusting mufflers and exhaust pipe components. Made in resin by 3D printing, they reproduce all the details, such as the conical finish of the spring and the "U" anchors that are welded on the exhausts, so ..

Set of bonnet latches in 1/12 scale. Includes a total of 8 closures made of resin and elastic rubber by 3D printing. The extreme detail with which these closures are designed and manufactured provide greater realism to the models, since the pieces can be attached allowing the mobility of the rubber ..

Lambda probe at 1/12 scale. Made in resin by 3D printing, they reproduce all the details with the usual quality of DECALCAS products, so you only have to paint and glue on your scale model.Family: Detail Scale: 1/12 Reference: DCL-PAR092 Item: Lambda probe - Type 1 Includes: 3D printed parts Parts..

WindshieldFamily: Vacuum formed parts Scale: 1/12 Reference: DCL-VAC005 Item: Kawasaki Ninja ZX-RR Includes: vacuum formed parts To be used with: Tamiya reference TAM14109..

WindshieldFamily: Vacuum formed parts Scale: 1/12 Reference: DCL-VAC011 Item: Kawasaki Ninja H2R Includes: vacuum formed parts To be used with: Tamiya reference TAM14131..