Model Planes

Conversion set enabling the modeller to build a Beaufighter Mk.21 version which was licence-built for the Royal Australian Air Force. The set contsists of resin cast parts, vacuum-formed canopy of the observer's cockpit and a decal sheet with markings for two RAAF machines. One wearing a drawing on ..

One of flaws of Airfix's Tempest is the very narrow pilot's seat which is also wrongly shaped. Our correction, 3D-printed set brings the right size seat which also have much better surface detail. The set contains a clear material 3D-printed gun sight...

Correction set to fix the mistake long time repeated in all scale drawings, the missing exhaust stub on the inboard face of the engine nacelles. The Azur/Frrom kit was unfortunately based on such imperfect DB-7 drawings...

The wing air intakes of ICM's A-26 Invader kits are among the least satisfactory details of the otherwise rather nice model. Our new intakes are both more detailed and of correct shape...

..

The TBM-3E was a lightweight version of the Avenger which begun to come off production lines in 1944. The weight reduction brought better performance and the installation of the APS-4 underwing radar equipment enabled the Avenger for night missions. Our conversion set reflects both the outside and i..

TBF-3/TBM-3 Avenger Paddle Blade Propeller Correction Set 1/48 for Accurate/Academy kits Among the only very few flaws of the TBF-3 Avenger kit (ex-Accurate Miniatures), unfortunately the quite visible one, is the propeller with narrow blades of the earlier TBF-1 version. And as the Dash Three had p..

September 2023 saw the re-release of SH48231 T-2 Buckley with new, clear plastic injected sprue. Now, the parts of this new sprue can be obtained separately, surely making happy those of you who already own the earlier kit sets no. SH48119, SH48129 or the reboxings by Two Bobs. - correction set for..

The kit of the MD-500D US helicopter produced by Academy in 1/48 scale is very nice and cheap. But it lacks two essential things. The first is imprecise interior (even the MH-6 version) and dull civilian markings. Therefore CMK decided to produce detailed conversion set allowing modelers to build AH..

..

The propeller blades of the new ICM B-26 are unfortunately rather wrong shaped as they completely lack the aerodynamic twist. Our set fixes this omission, the new blades are resin cast while the hubs are 3D printed...

This correction set eliminates one of the significant shortcoming of that otherwise well sold model. The air intakes of the real Mitchell are different in each wing and also have distinctive shape. Both these features are represented badly in the model. This also applies to the oil coolers outlets t..

It contains parts for converting Ju 88A to night fighter and long range version Ju 88C-2 that carried 1x MG 151/20 and 3x MG 17 in new nose...

..

..

This set contains a new, accurate radome, a replacement tailcone with towed decoy fairings, a corrected tailplane fairing, Defensive Avionics System fairing and antennas, and separate flow vanes. The Monogram kit represents a very early production B-1B and the nose shape is wrong. This set will allo..

..

Contains a new, accurate and highly detailed instrument panel (with instrument face decals),coaming, gunsight with clear cast gunsight glass, and all necessary blade antennas to convert a 1/32 Trumpeter A-4E/F to the RNZAF Kahu Skyhawk. All parts except the clear gunsight glass are 3D printed, and i..

Contains an accurate Aeroproducts Skyraider prop, consisting of four accurately shaped blades and detailed hub with backplate, to replace the inaccurate prop assembly in Trumpeter's Skyraider kits. This propeller was also fitted to some warbirds and Reno Unlimited Air Racers. Props can make or break..

This is a set of aft fuselage half parts that correct the shape error on the engine shoulders of the Zoukei Mura short nose Phantoms. in addition to the re-shaped geometry, some surface detail has been improved. Please note that this is not a drop-fit replacement set. Cutting of the fuselage is requ..

This is a full conversion set to build an NF-104A aerospace/astronaut trainer aircraft from the Kinetic F-104G kit. The set comes with all parts needed, some injection moulded plastic, some 3D printed, plus a turned brass pitot boom and a full set of decals by Caracal (printed by Cartograf)...

This is a conversion set for building an F-104B or early F-104D with downward firing C-1 ejection seats. As a base kit a Kinetic F-104D or TF-104G is needed. This conversion contains three new clear canopy parts (machine cast from transparent, UV stable resin), two C-1 seats plus ejection rails, a n..

This is a replacement resin fin tip for the HobbyBoss Intruder family. The HB fin tip has the wrong shape and once you have noticed the error you can't ignore it any longer...the surface detail is slightly corrected and enhanced as well. The required cut on the kit is fairly simple as it's along a p..

This is a corrected nose intake part for the Kitty Hawk FJ-3 Fury kit. It is a drop-in replacement for the kit part and features a corrected nose profile, in particular around the upper lip where the small radome is located. The kit part is too blunt, in the same way as the FJ-2 part is. The panel l..