Hobby & Model Paints

Tamiya Enamel Paints are used for brush or spray painting, and can be applied to almost any surface of wood, metal or plastic. Each bottle contains 10ml of paint, and when spray painting enamels, best results are achieved by adding 2 parts of thinner to 10 parts of paint.Note: Never apply lacquer ov..

Rain, puddles, streaking water and lots of other similar effects can be done using this excellent product. This product has the perfect solution, for simulating with great realism all those effects you can see on any type of vehicle. This is not a shiny varnish, it has been specially designed for th..

A new enamel product to create realistic streaking effects on your models. Easy to apply.Apply it to the side plates of your vehicle: Paint vertical lines with a fine brush, and later feather them with vertical motion.Use White Spirit AK-011 to thin the wash...

A Streaking Grime effect specifically designed for vehicles painted in the tri-colour camoflage principally used by NATO.Shake well before use and then paint irregular vertical lines on the sides of the model and after, blend using a flat wide brush with a small amount of our White spirit...

A new high quality enamel product, developed for scale aircraft models, with an improved fl ow for easy creation of depth, and emphasis of surface detail. This product is perfectly suitable for aircraft models which are painted in uniform green or brown schemes, or carrying camoufl age patterns comp..

This kit is currently for pre-order only. It is expected to be ready for shipping in mid December 2015. A deposit with a texture, to mix and use with other products, and helping to reproduce an ultra-realistic appearance of moss, lichen, and other green organic growth...

..

The perfect product to recreate accumulated dust and dirt on your model. This Light Dust enamel product is perfectly suitable for powdered vehicles on any world area at any time...

Apply it to the tank hull, wheels, tracks or horizontal plates to create light dust effects. Mix this dusty wash with AK White Spirit to create softer dust layers.Also you can mix with plaster to make mud with volume...

This kit is currently for pre-order only. It is expected to be ready for shipping in mid December 2015. This deposit formula has been developed to give the models an appearance of decay over the surface of abandoned elements, vehicles or buildings...

It has been specially designed for green vehicles, which are normally the darkest colours on military models. It has the perfect tone to be able to do the most spectacular effects on Sherman's, T34's or any other allied vehicle, modern or from WWII. An indispensable colour. Apply it to the side plat..

Enamel weathering colourAK Interactive enamel paints can be applied straight from the bottle, directly onto the chosen areas of your model. Once they are dry, they have the same scale appearance as real crusted rust...

Ideal colour for dioramas, vehicles and enviroments. Mix this this wash with AK thinner (White Spirit) to achieve more subtle and finer coats.When the wash is dry, it has a satin effect which helps representing the effect of wet or damp earth. It can be applied by using washes over your model or mix..

The range with figure label is a compilation of very specific colours used for painting historical figures, including WWI, WWII and modern uniforms...

The AFV label identifies specific colours for painting military vehicles from all eras. Very special tones used by different armies in different periods (FS, RAL, etc.)..

The AFV label identifies specific colours for painting military vehicles from all eras. Very special tones used by different armies in different periods (FS, RAL, etc.)..

ORANGE LABELThe basic label. The orange dot is the element that remarks a range of colours designed for any kind of modeller. The clear and easily identifiable label includes the name of the colour and its reference code at the top.click here to see the full colour chart and equivalence table...

ORANGE LABEL <br /> The basic label. The orange dot is the element that remarks a range of colours designed for any kind of modeller. The clear and easily identifiable label includes the name of the colour and its reference code at the top.<br /><br /><a href="https://www.b..

YELLOW LABELIntense colours are identified with the yellow circle on the label. These tones contain pigments of high purity and high concentration for the most vivid colours.click here to see the full colour chart and equivalence table...

ORANGE LABELThe basic label. The orange dot is the element that remarks a range of colours designed for any kind of modeller. The clear and easily identifiable label includes the name of the colour and its reference code at the top.click here to see the full colour chart and equivalence table...

ORANGE LABELThe basic label. The orange dot is the element that remarks a range of colours designed for any kind of modeller. The clear and easily identifiable label includes the name of the colour and its reference code at the top.click here to see the full colour chart and equivalence table...

ORANGE LABELThe basic label. The orange dot is the element that remarks a range of colours designed for any kind of modeller. The clear and easily identifiable label includes the name of the colour and its reference code at the top.click here to see the full colour chart and equivalence table...

ORANGE LABELThe basic label. The orange dot is the element that remarks a range of colours designed for any kind of modeller. The clear and easily identifiable label includes the name of the colour and its reference code at the top.click here to see the full colour chart and equivalence table...

ORANGE LABELThe basic label. The orange dot is the element that remarks a range of colours designed for any kind of modeller. The clear and easily identifiable label includes the name of the colour and its reference code at the top.click here to see the full colour chart and equivalence table...