K59
Brand: K59
SKU: K59-C-022
This set comes unassembled and unpainted.The picures show:- The 2cm gun with cradle attached. The main body and the barrel is casted in one piece.- Cradle with side ring attached. The gun will insert into the 2 small hooks at rear and lock by pin in front, as the real gun.- A new Ring Base is includ..
US$65.11
17 % OFF
US$53.52
Brand: K59
SKU: K59-C-002
It is an upgrade for Tamiya M3 halftracks, including the Drive Wheel and rear wheel. This is an upgrade version of the old set with 2 extra parts and a new Drive Wheel...
US$22.83
17 % OFF
US$18.87
Brand: K59
SKU: K59-Z-16
This is a highly accurate resin kit with 20 resin parts & 2 resin jigs. All parts are design/reproduced according to the real gun mount using measurements taken from the Hetzer at Austria Museum. For all 1:35 scale Hetzer, StuG 3 and StuG 4...
US$28.38
18 % OFF
US$22.99
Brand: K59
SKU: K59-C-019
1:35 Resin parts + Photo-etched parts + Aluminium barrel for Dragon kit..
US$53.33
17 % OFF
US$44.07
Brand: K59
SKU: K59-C-009
This 1:35 scale kit comes with a resin machine gun with details at all 4 sides: a highly detailed drum magazine; resin bipods in closed and opened position; PE sling, gun slight, etc.- new PE for the slings
- Total number of resin parts increased to 13nos...
US$17.98
19 % OFF
US$14.46
Brand: K59
SKU: K59-C-011
For Sdkfz 250 neu and Sdkfz 251 Ausf.D.Including 5 resin parts and 1 photo-etched parts..
US$13.13
18 % OFF
US$10.68
Brand: K59
SKU: K59-C-021
The set includes 28 resin parts, 18 resin spend shell case and photo-etched parts.Product Details:- Rear sight could be build into raised/lowered position, - Lock Bar is included inside gun mount pintle, - Quick release pin has a round resin pin with photo-etched front detail...
US$24.22
19 % OFF
US$19.50
Brand: K59
SKU: K59-C-008
This 16 parts upgrade kit for Dragon M2/M3 half track includes the Sprocket and Rear idler with much finer ribs; realistic rear idler spring; exhaust pipe mount; re-detailed return roller mount......
US$24.91
17 % OFF
US$20.48
Brand: K59
SKU: K59-C-024
This kit is to replace the 10.5cm Gun and Cradle of Tamiya Wespe kit.
It includes:
One piece cast Cradle with full details and thin wall.
Adjusting rod inside Cradle is faithfully reproduced.
Cradle front, cradle trunnion mount plate, recoil return scale... etc are all highly detailed.
Breech block ..
US$46.40
17 % OFF
US$38.12
Brand: K59
SKU: K59-C-020
This kit include the full upper carriage and gun shield to replace the one from Dragon and AFV club. It could be used on the 75mm Pak40 gun and SP guns with the Pak40.- 53 resin parts + PE parts + aluminium barrel- All details are faithfully reproduced such as the gun sight, cleaning rod head storag..
US$49.17
17 % OFF
US$40.64
Brand: K59
SKU: K59-C-010
Including 4 resin parts & 3 photo-etched partsFor sdkfz 250 neu, sdkfz 251 ausf.D and various german armour car..
US$11.75
19 % OFF
US$9.42
Brand: K59
SKU: K59-C-025
1 :35 scale resin kit
This kit contains 26 resin parts, one resin jig, 18 spend resin shell and PE parts.
Description:
This kit include parts to built one M2HB with an early M23 gun mount.
A highly detail one piece cast M2HB gun with separate barrel support.
Detail gun sights , the rear sight could ..
US$23.53
18 % OFF
US$19.22
Pre-Order
Brand: K59
SKU: K59-C-023
This kit is to replace the driving compartment of Bronco kit 35004/35005 and Trumpeter kit 00353/00354
It includes:
A highly detail transmission with switchboard and various controls.
The steering brake is faithfully reproduced with the perforated cover on the left side
With 8 resin parts and intric..
US$65.11
26 % OFF
US$48.17
Out Of Stock
Brand: K59
SKU: K59-Z-17
This kit is specially produced to fit K59's Remote Control Mg Mount (item Z-16) but it could also be use on all other panzers as well. Contain 12 resin parts & 2 PE parts including brackets for attaching the mg to StuG mg shield.The barrel, main gun body and ammo cover is produced as one single part..
US$17.98
17 % OFF
US$14.80
Out Of Stock
Brand: K59
SKU: K59-C-026
This kit include 81 resin parts and 16 resin Shell End Plates to replace/upgrade all Ammo Bins from Tamiya Marder 3 Sdkfz 139 (MM248).
Fully detail Ammo Bin which could be built with or without lid.
Sections of Shell Storage Tube included, details faithfully reproduced.
MP40 magazine pouch is cast w..
US$40.16
17 % OFF
US$33.08
Out Of Stock
Brand: K59
SKU: K59-C-027
This is an upgraded version of K59 vintage C-003 kit which were produced 20 years ago.
Most of the original parts from C-003 are improved and some totally remade such as the MP40,
Fire Extinguisher, Antenna mount and Rear Basket etc.
The kit is also redesigned to meet the production limit and our cu..
US$47.78
18 % OFF
US$39.03
Out Of Stock
Brand: K59
SKU: K59-C-018
Metal Barrel is Not included.- Total number of resin parts increased to 29nos.
- NO aluminium barrel included..
US$38.08
17 % OFF
US$31.47
Out Of Stock
Brand: K59
SKU: K59-C-012
This set includes:- 14 Magazines;2 Lid-open Ammo Box;8 Lid-close Ammo Box;12 Sprgr Projectile;12 Pzgr Projectile;30 ShellsThe Ammo box fits perfectly into the floor space of Trisatr and Dragon's Flak 38T (See photos)...
US$21.45
17 % OFF
US$17.61
Out Of Stock
Brand: K59
SKU: K59-C-013
#NOTE: The set does NOT include a tank model kit...
US$66.49
18 % OFF
US$54.50
Discontinued
Brand: K59
SKU: K59-C-015
Only ONE gun and one mount plus 25 resin shells are included. Can be built as either D36960 or D54075...
US$18.36
17 % OFF
US$15.09
Discontinued
Showing 1 to 22 of 22 (1 Pages)
