Military Vehicles & Tanks

External AFV US and Australian Spot-Welded tie Downs x70 External spot-welded ties downs, commonly called footman loops. These are found on M113s throughout the world. These were also used on other US-made armored vehicles from the 1960's on...

Centurion Road Wheel rubber replacement. Sufficient for 24 road wheels and two spares, i.e., for one vehicle.This upgrade set is designed as a direct replacement for the AFV Club Centurion rubber wheels. Measurements were directly taken from an Australian Army Centurion Tank, then designed and 3D ..

The Larkspur Antenna Bases were widely used on vehicles from Britain, Australia, NATO, and other allied countries. Serving as the standard British radio system from the 1950s to the 1970s, it was installed on various Australian vehicles, including Ferrets, Saladins, Saracens, Centurions, and a range..

3x Australian 105mm Ammunition Box Can be used for in conjunction with M119 Hamel Light Gun, M2A2 105mm Howitzer, L5 105mm Pack Howitzer. Can also be used as extra stowage as seen on a variety of vehicles from Vietnam to the current Modern-era...

Australian M113 Sponson Armour for one M113 vehicleDuring the Vietnam conflict, the Australian M113s were fitted with sponson armour on each side of the vehicle, to help counter the threat of mines and IEDs. This modification occurred from 1969 onwards. All M113 in Australian service were fitted..

Australian M113s were fitted with Front and Rear indicator lights. This modification occurred from around the early 1970's onwards, till they were replaced by another style of indictor lights in the late 1990's. Check your references before fitting.This upgrade set is a direct replacement for AF..

Can be used for in conjunction with M113A1 FSV, M113A1 MRV and Saladin Armoured Car. Can also be used as extra stowage as seen on a variety of vehicles from Vietnam to the late 1990's...

..

..

..

(IR box ) from September '44 - for Trumpeter kit..

Set contains 3D printed parts. Supports have to be removed..

Set contains 3D printed + resin parts. Supports have to be removed..

..

..

M1296Transform TK7007 Dragon 7686 Dragon Armor DA63006..

M1128Transform TK7008 Dragon 7687 D-Toys DT72-005 Dragon Armor DA63007 M1132 M1134Dragon 7685 D-Toys DT72-006 Dragon Armor DA63005 M1135..

M1126Academy 13413 Academy 13411 Trumpeter 07255 M1127 D-Toys DT72-005 M1129 M1130 M1131 M1133..

Tips for using 3D-print parts 1. Some 3D-print parts may have slight layer patterns or pixel patterns. Please spray primer before using. 2. If the part is bent and deformed, please use hot water or a hair dryer to heat it and correct it. 3. If there is residual resin or debris on the surface of the ..

#NOTE: The set does NOT include a model kit...

Tips for using 3D-print parts 1. Some 3D-print parts may have slight layer patterns or pixel patterns. Please spray primer before using. 2. If the part is bent and deformed, please use hot water or a hair dryer to heat it and correct it. 3. If there is residual resin or debris on the surface of the ..

..

..

Please note that the tank in photo is just for display but NOT included in this set...