Model Motorcycles

..

..

This is a detail set, model kit is not included.The set contains PE, Metal parts, Resin...

Includes: Resin, Metal, Turned metal, Cable/Wire#NOTE: The set does NOT include a model kit.Designed for:Tamiya 1/12 REPSOL Honda RC213V '14..

Model detail parts are essential to making a car or motorcycle model stand out. This braided hose is perfect for creating brake lines, fuel pipes etc. as seen on real life vehicles. The surface texture is artfully depicted using interior rubber tubing wrapped with thread. Simply attach to your model..

Transparent plastic sheets for replacing the injected plastic side windows that usually include the car kits in 1/24 scale. Includes 104mm x 73mm - 4 sheets.Family: Window Reference: DCL-VAC016 Item: Transparent window Includes: other materials Parts: 4 units..

Non-hex head screws set composed of 4 types of screws each type in 4 sizes 0.6mm, 0.8mm, 1.0mm and 1.2mm. Whole set is composed of max. 956 screws*. Kit contains: - internal torx: 0.6mm x 80, 0.8mm x 60, 1.0mm x 54, 1.2mm x 45 - external torx: 0.6mm x 80, 0.8mm x 60, 1.0mm x 54, 1.2mm x 45 - allen k..

Hex head screws set composed of 4 types of screws each type in 4 sizes 0.6mm, 0.8mm, 1.0mm and 1.2mm. Whole set is composed of max. 964 screws*. Kit contains: - hex head screws: 0.6mm x 80, 0.8mm x 60, 1.0mm x 54, 1.2mm x 45 - hex nut with washer: 0.6mm x 80, 0.8mm x 60, 1.0mm x 54, 1.2mm x 45 - hex..

Decalcas: Marking / livery 1/12 scale - Yamaha YZR500 sponsored by Dainese #1 - Kenny Roberts (US) - Motorcycle World Championship 1979 - water slide decals manufactured with digital technology -for Tamiya references TAM14001 and TAM14026..

Kit contains: - chain with sprockets (precut and ready for painting), - front sprocket screw (printed on sprocket), - set of rear sprocket nuts (printed on sprocket)...

Kit contains: - chain with sprockets (precut and ready for painting), - front sprocket screw(printed on sprocket) , - set of rear sprocket nuts (printed on sprocket)...

Kit contains: - chain with sprockets (precut and ready for painting), - front sprocket screw (printed on sprocket), - set of rear sprocket nuts (printed on sprocket)...

Kit contains: - chain with sprockets (precut and ready for painting), - front sprocket screw (printed on sprocket), - set of rear sprocket nuts (printed on sprocket)...

Upgrade set for the Suzuki Ecstar GSX-RR by Tamiya, with which to replace parts such as the rear brake caliper and disc, rear wheel axle and nut, chain tensioner, brake and gear change pedals, kickstand brackets, add the antennas to the side camera, and replace the fastening screws of the parts of t..

Set of parts for replacing the chain assembly of the Tamiya Suzuki GSX-RR in 1/12 scale. It includes the pinion, chainring, fixing nuts, chain and closing link, which facilitates the paint job. The extreme detail with which this set is designed and manufactured allows for greater realism to the mode..

Pre-cut paint mask in repositionable low-adherence paper, which fits over the different parts of the Tamiya model to be protected in order to carry out the correct painting process. With the Decalcas mask it is no longer necessary to spend time cutting the complicated silhouettes of the mask provide..

Kit contains: - chain with sprockets (precut and ready for painting), - set of rear sprocket nuts (printed on sprocket)...

Kit contains: - clutch with visible discs, - clutch basket...

Kit contains: - chain (placed on the stiff base), - front and rear sprockets (printed as separate parts), - rear sprocket screws (spare parts included), - front sprocket nut, - nuts for the rear wheel axle with wire for making the locking cotter, - chain tensioners with tensioning bolts...

Kit contains: - chain with sprockets (precut and ready for painting), - a set of bolts with nuts for the rear sprocket, - nut on the front sprocket, - nuts for the rear wheel axle with wire for making the cotter pin, - chain tensioners with tensioning bolts (their installation requires modification ..

Short springs with shock absorber reproduced at 1/12 scale, similar to those used in competition for mounting and adjusting mufflers and exhaust pipe components. Made in resin by 3D printing, they reproduce all the details, such as the conical finish of the spring, the rubber that protects it, and t..

Short springs reproduced at 1/12 scale, similar to those used in competition for mounting and adjusting mufflers and exhaust pipe components. Made in resin by 3D printing, they reproduce all the details, such as the conical finish of the spring and the "U" anchors that are welded on the exhausts, so..

Set of 40 electrical angular connector (4 types) plus 10 straight connectors and 2 types regulators and 2 types of ECU units which will raise level of detail of your model on the next level. Each part has predrilled holes making this kit easy to use. Kit also include wires in 8 colors (approx. 13 cm..

Set dedicated to upgrade brakes in 1/12 scale motorcycles. Kit contains: bleeding screws in two sizes (15 of each type), brake caliper screws (three types: external torx, internal torx, allen key; each type in two sizes, 20 of each size), T shape screws in two sizes for carbon ceramic rotors along w..