Model Planes

3D ResinThis set includes a new compressor blade face to facilitate easier painting. Removal of the compressor blades from the kit intake piece is required. Also included are detailed air temperature probes. One for the port side of the vertical tail, and two for the inside of each intake. Two extra..

3D ResinThis set includes eight (8) AOA Probes. Can be used on the F/A-18A-D, AV-8B, A-6E, EA-6B and several others...

3D ResinThis set includes four (4) sets of antenna typically found on F/A-18A+/A++/C/D Hornets.Includes a vinyl template to aid in proper alignment. Can be used on any 1/48 F/A-18 Hornet kit...

This set includes fifteen (15) total air temperature probes used on a variety of aircraft.Designed by Craig Sargent..

The FMV Mod fitted to the tail boom of the AH-1Z and UH-1Y allows grounds units to see what the aircrew sees through the aircraft's FLIR.Designed for the Kittyhawk kits..

This set includes one (1) adapter and can be used on all F-4 kits. This adapter is used to carry the MER or TER on the centerline station...

3D ResinThis set includes twelve (12) of the larger, swept back antenna typically found on the F/A-18 Hornet. Antenna is also used on other aircraft, so check your references.Can be used on any kit..

#NOTE: The set does NOT include a model kit...

3D ResinThis set includes twenty four (24) USAF style solid nose plugs These are designed to work with all kit supplied bombs that may not have accurate or clean versions...

3D ResinThis set includes two (2) ailerons and two (2) elevators for the Special Hobby kit. These are direct replacements for the multi piece kit parts.CAD by Craig Sargent..

3D ResinThis one piece boarding ladder is designed to fit both the Meng and Hasegawa Super Hornet / Growler kits. May also work with the Revell and Italeri kits, with possible modifications to kit needed.Designed by Richard VanZandt of Flightline Resin, item comes as shown in the photo...

This set includes correctly shaped and sized LEX Fence parts applicable to all 1/32 F/A-18A/B/C/D Hornet kits...

3D ResinThis set includes a total of four (4) tail stiffening plates commonly found on F/A-18A and F/A-18A+ Hornets. The four plates will complete two (2) models.3D printed, the plates have all of the rivet and screw fasteners visible. Simply remove from the support, sand the small attachment poin..

3D ResinThis set includes six (6) GPS Antenna found on the F/A-18 Hornet, EA-6B Prowler, CH-46E and several other aircraft.3D printed, parts come as shown and are very easily removed from the supports using sharp sprue cutters or X-Acto type blade. Use Super Glue (CA) to attach to kit...

3D ResinThis set includes three (3) pieces that make up the belly strap found on late F-4E and all F-4G Phantoms. Designed to be used on the Revell kits, it may work on the Tamiya kit as well.The strap was also found on the F-4S and the F-4J's operated by the UK.Parts come as shown and can be ..

Vinyl Detail..

This set includes four (4) octagon shaped drip pans commonly found under aircraft, both on the flightline and in hangar spaces. Great for use in dioramas to add a little bit more realism to your scene.Parts come as shown in photo. Very light sanding needed on one surface needed prior to painting...

This set includes eight (8) corrected Pitot Tubes for use on the F/A-18A thru D, F-14A/B/D, A-7D/E and F-8E.Directly replaces kit parts in the Academy, Tamiya and Trumpeter kitsCAD by Dave Roof..

3D ResinThis set includes six (6) SATCOM Antenna with short mount found on a number of Helicopters. Use fine sprue cutters to remove part from support and lightly sand base smooth. Attach using super glue (CA)...

This set includes 9 pieces to Upgrayedd your Trumpeter AV-8B Day Attack Harrier kit...

3D ResinThis set includes four (4) sets of antenna typically found on F/A-18A+/A++/C/D Hornets.Includes a vinyl template to aid in proper alignment...

This set includes 6 buckets that can be used to replace those found in kits that may be under detailed...

This set includes six (6) buckets that can be used in a diorama setting (ordnance loading evolution) or to replace kit parts...

3D ResinThis set includes fifteen (15) total air temperature probes used on a variety of aircraft.Designed by Craig Sargent..