Model Planes

This set includes a total of four (4) tail stiffening plates commonly found on F/A-18A and F/A-18A+ Hornets. The four plates will complete two (2) models.3D printed, the plates have all of the rivet and screw fasteners visible. Simply remove from the support, sand the small attachment points smoot..

3D ResinThis set includes three (3) pieces that make up the belly strap found on late F-4E and all F-4G Phantoms. Designed to be used on the Meng kits, it may work with other kits with some adjustments.The strap was also found on the F-4S and the F-4J's operated by the UK.Parts come as shown a..

Redesigned set includes the plates added to the upper wing and forward nose section. Parts adjusted to accurately fit all 1/48 F-16 kits...

This set includes four (4) octagon shaped drip pans commonly found under aircraft, both on the flightline and in hangar spaces. Great for use in dioramas to add a little bit more realism to your scene.Parts come as shown in photo. Very light sanding needed on one surface needed prior to painting...

This set includes six (6) SATCOM Antenna with short mount found on a number of Helicopters. Use fine sprue cutters to remove part from support and lightly sand base smooth. Attach using super glue (CA)...

3D ResinThis set includes correctly sized vortex generators for the wings of the AV-8B Harrier. Pieces are attached to a jig used to help put them in the correct place.Remove VG's from kit wingApply small drops of CA to bottom of resin VG's, put in place using jig. When set, carefully cut the ji..

Designed by Jason Liang, this new set corrects the horribly inaccurate TSS provided in the kit.Includes a holographic vinyl piece for the FLIR window. We recommend using a 5 minute epoxy, applied in thin layers to create the 'glass' for the TV windows...

The FMV Mod fitted to the tail boom of the AH-1Z and UH-1Y allows grounds units to see what the aircrew sees through the aircraft's FLIR.Designed for the Kittyhawk kits..

This set includes three (3) ADM-141 TALD.The TALD was used with great success on SEAD missions in the opening stages of Operation Desert Storm in 1991. More than 100 were launched on the opening night of the war. This prompted the Iraqi air defense to activate many of its radars most of which wer..

#NOTE: The set does NOT include a model kit...

Vinyl Detail..

This set includes eight (8) corrected Pitot Tubes for use on the F/A-18A thru D, F-14A/B/D, A-7D/E and F-8E.Directly replaces kit parts in the Academy, Tamiya and Trumpeter kitsCAD by Dave Roof..

3D ResinThis set includes twelve (12) of the larger, swept back antenna typically found on the F/A-18 Hornet. Antenna is also used on other aircraft, so check your references.Can be used on any kit..

1/72 scale replacement weapons bay cover for F-111 aircraft fitted with Pave Tack targeting system but in the stowed position. Replaces kit part number B23 or Q6. Designed specifically for Hasegawa kits...

..

#NOTE: The set does NOT include a model kit...

#NOTE: The set does NOT include a model kit...

#NOTE: The set does NOT include a model kit...

Larger 90 gallon wing tip tanks as used by RAAF aircraft. For use with Italeri kit...

..

2 x resin pylons and 2 x side rails per pack...

..

..

..