Model Planes

..

..

..

..

..

Please note that the plane in photo is just for display but NOT included in this set...

Please note that the plane in photo is just for display but NOT included in this set...

Please note that the plane in photo is just for display but NOT included in this set...

..

for AFV Club 14 Resin/ 15 PE parts..

These are 3D printed face curtain handles for MB Phantom ejection seats. The handles are mainly designed for the Hypersonic Models Mk. H5 seats but can be used on other types (H7) and manufacturer's seats as well. The handles are 3D printed but from a slightly elasctic resin that doesn't break as ea..

This is an empty SR-71 brake chute bay with open doors, as commonly seen after landing. Designed specifically for the Revell kit. The set comes in four 3D printed parts: the main bay, a separate end cap (for easier painting) and separate doors. The door parts have mounting lips and recesses designed..

This set contains the parts needed to build an accurate late type F-104A from the Kinetic F-104A/C kit. "Late" means that it's an airframe that was converted to the upward firing C-2 seat. Therefore you can either use the kit supplied seat or one of the various available aftermarket options.The pa..

This is a set of highly detailed and appropriately proportioned stick/grip and throttle for the Kinetic F-104 kits in 1:48. The kit parts are both oversized and a bit sparse in detail. These 3D printed resin parts are drop-in replacements that fit right into the kit's mounting holes. The parts fit b..

This is a set of highly detailed and appropriately proportioned stick/grip and throttle for the Kinetic F-104 kits in 1:48. The kit parts are both oversized and a bit sparse in detail. These 3D printed resin parts are drop-in replacements that fit right into the kit's mounting holes. The parts fit b..

This is a set of two aft canopy braces for Kinetic F-104 Starfighter kits. This part is applicable to all F-104 single seat variants and is not provided in any of the Kinetic's kits. The part is very delicate, but printed from slightly forgiving resin for safer support removal and handling...

..

..

..

..

German WWI biplanes had an airspeed indicator that worked with an anemometer; the whole device was attached to the wing near the pilot, as can be seen in the old WWI photo on the right. With current modelling resins, in 1/48 and 1/32 scales, the narrow parts of the anemometer break easily, and the n..

F4U-5N Corsair Cockpit set for Hasegawa 1/48Detailed bath-tub details,Correct instrument panels,Total 12 resin partsColor printing manual included..

..

Set contains photoetched board (22*17 mm) for detailing of seat belts for aircraft models MiG-25."The Mikoyan-Gurevich MiG-25 (NATO: Foxbat) - a supersonic interceptor and reconnaissance aircraft.Produced: 1964-1984.Operators: Algeria, Armenia, Bulgaria, Belarus, India, Georgia, Kazakhstan, Li..