Model Planes

These Missile Launchers are designed to fit the Trumpeter F/A-18E/F wing tip and should work with the Revell kit.Launchers come as shown and only a light sanding of the aft end to remove the support nibs is required. Integrated formation light panel fits into slot on both kit wing tip parts.Fou..

These Missile Launchers are designed to fit the Trumpeter F/A-18E/F wing tip and should work with the Revell kit.Launchers come as shown and only a light sanding of the aft end to remove the support nibs is required. Integrated formation light panel fits into slot on both kit wing tip parts.Fou..

Set includes four (4) launchersUse for early F/A-18E/F..

Set includes four (4) launchersUsed to carry and launch AIM-9X and AIM-120B/C..

Set includes four (4) launchersUse for early F/A-18E/F..

Set includes four (4) missile launchers.Used to carry and launch AIM-9X and AIM-120B/C..

Set includes four (4) launchers.Used to carry two LAU-127E/A or LAU-127A/A for dual AIM-9X / AIM-120B/C carriage..

LAU-115C/A is a rail launcher designed for carriage and launch of AIM-7 missiles from F/A-18 aircraft. The launcher is suspended from the BRU-32 bomb racks in the SUU-63 wing pylons. Two LAU-7 or LAU-127 launchers may be attached to the sides of the LAU-115 for carriage of AIM-9 or AIM-120 missiles...

LAU-115/A is a rail launcher designed for carriage and launch of AIM-7 missiles from F/A-18 aircraft. The launcher is suspended from the BRU-32 bomb racks in the SUU-63 wing pylons. Two LAU-7 or LAU-127 launchers may be attached to the sides of the LAU-115 for carriage of AIM-9 or AIM-120 missiles. ..

3D ResinThis set includes two (2) LAU-10 rocket pods, eight (8) Mk-71 Mod 1 Rocket Motors, eight (8) Mk-32 Mod 0 AT/AP Warheads with Mk-93 Mod 0 Fuze and eight (8) Mk-32 Mod 0 AT/AP Warheads with Mk-188 Impact FuzesLAU-10 CAD by Matt FarrowRockets and warhead CAD by Dave Roof..

3D ResinThis set contains two (2) LAU-10 5.00" rocket pods with empty tubes. Tubes are hollow the whole length of the pod.Designed by Matt Farrow of Shrunk Craft..

Set includes four Mk-82/BLU-111 bombs with rough ablative coating, four KMU-572 kits, which include the tail assemblies and nose strake as separate pieces.Also included are four (4) each : DSU-33 proximity fuzes, MXU-735 solid nose plugs and Ogive nose plugs...

Set includes four slick Mk-82/BLU-111 bombs, four KMU-572 kits, which include the tail assemblies and nose strake as separate pieces.Also included are four (4) each : DSU-33 proximity fuzes, MXU-735 solid nose plugs and Ogive nose plugs...

Set includes two Thermally Protected Mk-83 / BLU-110A/B bombs with KMU-559 guidance kit attached and the tail assemblies as separate pieces.Also included are two (2) DSU-33 proximity fuzes, two (2) MXU-735 solid nose plugs and two (2) Ogive nose plugs...

Set includes two Mk-83/BLU-110 bombs with KMU-559 guidance kit attached and the tail assemblies as separate pieces.Also included are two (2) DSU-33 proximity fuzes, two (2) MXU-735 solid nose plugs and two (2) Ogive nose plugs...

3D ResinThis set includes four (4) Thermally Protected GBU-12 laser guided bombs. For ease of alignment, while still being easy to paint, the guidance sections and warheads are printed together.** Due to slight variations in the printers used, it may be necessary to drill out the holes for the fi..

3D ResinThis set includes four (4) GBU-12 laser guided bombs. For ease of alignment, while still being easy to paint, the guidance sections and warheads are printed together.** Due to slight variations in the printers used, it may be necessary to drill out the holes for the fins in the guidance s..

3D ResinThis set includes two (2) fuel tanks, made up of four (4) parts each. The nose section, main body, tail cone and a key to line up the nose and main body.Lightly sand the aft surface of the main body to remove the print support nibs, insert key, then attach nose section. Light sanding of th..

This set includes four (4) highly detailed ADU-703 adapters with BRU-32 bomb racks for use on the Tamiya, Revell and Trumpeter 1/32 F-14A/B/D kits. Modification to the kit weapons rails will be necessary. Drawings with measurements on where to cut are provided.Released in cooperation with our frie..

3D ResinThis set includes twenty four (24) DSU-33 Proximity Fuzes. These are designed to work with all kit supplied bombs that may not have accurate or clean versions...

3D ResinThis set includes one travel pod for use on all USN/USMC F-4 Phantom kitsCAD by Craig Sargent..

3D ResinThis set includes twelve (12) BDU-33 25lb practice bombs...

This set includes eight (8) wing pylons, one (1) centerline pylon, seven (7) BRU-36 ejector racks, and two (2) LAU-138 BOL launchers.3D printed and designed by Richard VanZandt using photos and measurements provided by FLD, Simon Oakes, Robert Foster and David Sweetman..

This set includes eight (8) wing pylons, one (1) centerline pylons, and seven (7) BRU-36 ejector racks.3D printed and designed by Richard VanZandt using photos and measurements provided by FLD, Simon Oakes, Robert Foster and David Sweetman..