Model Planes

Seat belts, suitable for Iljuschin Il-2, are made from micro-plastic foil. In combination with attached photo etched buckles this accesorry looks highly realistic. These are available in 1/48 scale and for more comfortable work they are pre-cut. Designed for Tamiya, Eduard, Italeri and Accurate Mini..

..

1. Preparation: to achieve better result, a gloss or semi-gloss coat is very important. It will make a smooth layer which the decals will suction to and make it much easier to apply and set them. 2. Cut out the decal you need (do it on cutting mat) 3. Grab the decal with tweezers, place it on the su..

The set contains 1x Bf109 G-6/G-14 Reichsverteidigung - Markings 1/48 - 2480602x Bf109 G-K - Stencils 1/48 - 248030The biggest issue relating to using ordinary decals is the varnish which creates a glossy film around the decal. It is quite hard to work with classic decals the way to make this film..

The set contains 1x Messerschmitt Bf109 "Afrika" - Markings 1/48 - 2480502x Messerschmitt Bf 109F - Stencils 1/48 - 2480452x Bf109 G-K - Stencils 1/48 - 248030The biggest issue relating to using ordinary decals is the varnish which creates a glossy film around the decal. It is quite hard to..

natural light wood with faded effect,suitable for Eduard kit,base white decal,1:48 scalethis set is designed precisely for Eduard kitlight wood - naturalBASE WHITEInstructions:Pasted/fixed/glued, puttied and polished model paint by base white (it is suitable to polish also this coloured layer before..

Stencils for Sopwith F.1 Camel Clerget model in 1/32 scale suitable for kits by Wingnut Wings. Wet transfer technology means that decal doesn't leave any signs of varnish or typical film after its application, so only text or symbols stay attached to the surface.The preparation of the surface prior ..

Contains complete stencils + cockpit stencils + nameplates. Contains all 4 types of propellers used on Thunderbolt. These are arranged as one piece decals by which it is possible to apply both the brand logo of the manufacturer and yellow tip of the propeller blades. As bonus P-47D serial numbers ar..

..

This type is transparent, so it is possible, through base colour, to regulate final shade of the decal. Wooden structure is equal to 1/32 scale. Pasted/fixed/glued, puttied and polished model paint by base white (it is suitable to polish also this coloured layer before applying wooden decals). The d..

Set consists of free lines of positive rivets in 1/32 scale. Riveting sets from HGW Models give to surfaces of plastic kits highly realistic look. We recommend to apply them under the paint and when your model is painted just polish the surface to make the accessory visible.Instructions:1. Cut requi..

..

Scale: 1:32Item Type Static kitModel Brief: GBU-15(x2);GBU-15B(x2);MER(x2);TER(x2);LGTR(x2);AAQ-13 LANTIRN(x1); ALQ-131(x1);FLIRPOD(x1);GBU-24(x2)..

Highly detailed bomb bay including doors for post war British reconnaissance aircraft...

How-to:Preparing the masks: Masks should not be stretched during the application process as they are flexible and this could cause deformation. Remove the whole mask if necessary, and then apply again. Once placed on the model, the mask surface should be adjusted to the surface of the model by traci..

How-to:Preparing the masks: Masks should not be stretched during the application process as they are flexible and this could cause deformation. Remove the whole mask if necessary, and then apply again. Once placed on the model, the mask surface should be adjusted to the surface of the model by traci..

For the new 1/72 Viggen kit as produced by Special Hobby / Tarangus, a complete cockpit set has been designed by CMK, the new resin parts directly replace the original styrene ones, no surgery required at all. The master parts were designed and produced using our 3D technology. The set also contains..

Type : Paint MaskHow-to:Preparing the masks: Masks should not be stretched during the application process as they are flexible and this could cause deformation. Remove the whole mask if necessary, and then apply again. Once placed on the model, the mask surface should be adjusted to the surface of t..

*Note: unassembled and unpainted plastic kit.In mid-80 there were designed Soviet air-to-air air-launched missiles of the fourth generation.This set intends for Su-27/Su-30 and MiG-29 fighters families models.Details for the assembly of 6 R-27ER, 2 R-27ET, 6 R-77, 6-R 73 missiles and also APU-470, A..

1 canopy mask (outside) + 2 insignia masksType : Paint MaskSuper Mask Series - contain masks for painting cabins and stencils for distinctive paintings based on photos and other primary sources. Super Mask series also contains colour airplane drawings in four projections depicting the placement of t..

Features: - Total 3 a/c markings for 111th Squadron of JMSDF - 2x resin parts and 1x photo-etched sheet included - A4 size manual includedHow to apply water-slide decals: 1. Preparation: to achieve better result, a gloss or semi-gloss coat is very important. It will make a smooth layer which..

How-to:Preparing the masks: Masks should not be stretched during the application process as they are flexible and this could cause deformation. Remove the whole mask if necessary, and then apply again. Once placed on the model, the mask surface should be adjusted to the surface of the model by traci..

How-to:Preparing the masks: Masks should not be stretched during the application process as they are flexible and this could cause deformation. Remove the whole mask if necessary, and then apply again. Once placed on the model, the mask surface should be adjusted to the surface of the model by traci..

..