Model Planes
Pre-Order
Brand: Metallic Details
SKU: MED-MDR7296
Set contains 3D-printed parts for detailing of propellers for the aircraft model Arado Ar 196...
US$5.45
25 % OFF
US$4.05
Pre-Order
Brand: Metallic Details
SKU: MED-MDR72101
Set contains 3D-printed parts for detailing of engine for aircraft model Arado Ar 196...
US$10.93
20 % OFF
US$8.69
Pre-Order
Brand: Metallic Details
SKU: MED-MDR7295
Set contains 3D-printed parts for detailing of cowling and engine for aircraft model Arado Ar 196...
US$17.09
18 % OFF
US$14.01
Brand: Eduard
SKU: ED CX409
This product contains a die-cut flexible foil for masking a kit or section of a kit during the painting of a scale plastic model. When selecting this set make sure that it is for the kit recommended as these sets are made specifically for that kit.How-to:Preparing the masks: Masks should not be stre..
US$7.50
47 % OFF
US$3.96
Brand: Resin Improvement
SKU: RESIM-CM48001
How-to:Preparing the masks: Masks should not be stretched during the application process as they are flexible and this could cause deformation. Remove the whole mask if necessary, and then apply again. Once placed on the model, the mask surface should be adjusted to the surface of the model by traci..
US$4.08
48 % OFF
US$2.09
-72 %
Brand: Maestro
SKU: MMK4874
The short pylon (type J5) is used for the rocket pod and the longer rail is for Rb24. Remove parts from casting blocks. There are locator pins on adapters to fit in holes on the Y-pylon. Front end the of pylon is to be located 43 mm behind the nose wheel bay of Hasegawas kit...
US$12.30
US$3.34
Pre-Order
Brand: Metallic Details
SKU: MED-MDP48007
Product Type: 3D Decals
Equipment Type: Seats (not included)3D Decals Instructions
- Soak the decal in warm water for a few seconds. Once it separates from the backing paper, position it on the model.
- For better adhesion, use white glue, Mr. Mark Setter, or apply the decal to a glossy surface.
- A..
US$6.13
19 % OFF
US$4.95
Pre-Order
Brand: Metallic Details
SKU: MED-MDP48002
Product Type: 3D Decals
Equipment Type: Seats (not included)3D Decals Instructions
- Soak the decal in warm water for a few seconds. Once it separates from the backing paper, position it on the model.
- For better adhesion, use white glue, Mr. Mark Setter, or apply the decal to a glossy surface.
- A..
US$6.13
19 % OFF
US$4.95
Brand: CMK
SKU: CMK-4270
Set contains four highly detailed WWII Soviet 100 Kg aircraft bombs. These were the most common weapons used by Red Army Air Force during WWII (for inst. DB-3 / IL-4, Il-2m3, Boston, La-5FN). Set includes photo-etched parts...
US$6.13
26 % OFF
US$4.50
Brand: Flightpath
SKU: FP-48-002E
These 'Pens' or revetments were also built to a larger size for some twin-engined aircraft - but it is the version for single engined fighters such as the Spitfire or Hurricane that we have chosen to portray in these new kits.As you will see from the plan there were two pens [left and right handed] ..
US$71.89
36 % OFF
US$45.43
Pre-Order
Brand: Metallic Details
SKU: MED-MDP48010
Product Type: 3D Decals
Equipment Type: Seats (not included)3D Decals Instructions
- Soak the decal in warm water for a few seconds. Once it separates from the backing paper, position it on the model.
- For better adhesion, use white glue, Mr. Mark Setter, or apply the decal to a glossy surface.
- A..
US$4.08
24 % OFF
US$3.08
Pre-Order
Brand: Metallic Details
SKU: MED-MDP48009
Product Type: 3D Decals
Equipment Type: Seats (not included)3D Decals Instructions
- Soak the decal in warm water for a few seconds. Once it separates from the backing paper, position it on the model.
- For better adhesion, use white glue, Mr. Mark Setter, or apply the decal to a glossy surface.
- A..
US$4.08
24 % OFF
US$3.08
Pre-Order
Brand: Metallic Details
SKU: MED-MDP48008
Product Type: 3D Decals
Equipment Type: Seats (not included)3D Decals Instructions
- Soak the decal in warm water for a few seconds. Once it separates from the backing paper, position it on the model.
- For better adhesion, use white glue, Mr. Mark Setter, or apply the decal to a glossy surface.
- A..
US$4.08
24 % OFF
US$3.08
Pre-Order
Brand: Metallic Details
SKU: MED-MDP48006
Product Type: 3D Decals
Equipment Type: Seats (not included)3D Decals Instructions
- Soak the decal in warm water for a few seconds. Once it separates from the backing paper, position it on the model.
- For better adhesion, use white glue, Mr. Mark Setter, or apply the decal to a glossy surface.
- A..
US$4.08
24 % OFF
US$3.08
Pre-Order
Brand: Metallic Details
SKU: MED-MDP48017
Set contains parts for detailing of seat belts for Italian aircrafts during the WWII...
US$4.08
24 % OFF
US$3.08
Brand: CMK
SKU: CMK-4318
The set contains two different types of magazines for flares, two signal pistols, two drum magazine boxes and 5pcs of drum magazines. The bigger flare magazine was usually attached on the top of a rear fuselage, the smaller one on the side of the fuselage outside the cockpit...
US$6.82
22 % OFF
US$5.27
Brand: GasPatch
SKU: GAS13-48028
French heavy machine gun rarely used due to high weight..
US$8.19
39 % OFF
US$4.96
Future Release
Brand: Airfix
SKU: AX07116
Product Info
Packed full of detail, this brand-new mould includes closed or open canopy options, to reveal the detailed internal fuselage structure. The wings can be built with open or closed leading edge slats and dropped flaps. The undercarriage features covered or uncovered wheels, with optional..
US$46.67
Pre-Order
Brand: Great Wall Hobby
SKU: L4825
** This model kit is supplied in unassembled and unpainted plastic components. Please note that glue, model paints, and other basic modelling tools are required and sold separately...
US$112.99
17 % OFF
US$93.38
Pre-Order
Brand: Tori Factory
SKU: ZL-TF-B15
It is the second set of missiles and bombs used by the Korean Air Force that can be applied to the TA-50 and FA-50 series of Wolfpack designs.
The second set of arms is a cluster bomb set that can wreak havoc on a large area of ground forces.
Each armament faithfully reproduced the details of the de..
US$58.19
18 % OFF
US$47.64
Pre-Order
Brand: Tori Factory
SKU: ZL-TF-B14
It is the first missile and bomb set used by the Korean Air Force that can be applied to the TA-50 and FA-50 series of Wolfpack designs.
The first set of arms is the most common combination, consisting of two Maverick missiles, 6 of Mk.82 bombs, and two side winders.
Each armament faithfully reprodu..
US$58.19
18 % OFF
US$47.64
Pre-Order
Brand: Tori Factory
SKU: ZL-TF-B16
It is the third missile and bomb set used by the Korean Air Force that can be applied to the TA-50 and FA-50 series of Wolfpack designs.
The third set of arms is the configuration for long range precision ground strikes.
Along with two GBU-12 laser guided bombs, it consists of AN/AAQ-33 snapper pods..
US$58.19
18 % OFF
US$47.64
Pre-Order
Brand: Metallic Details
SKU: MED-MDR48262
Set contains 3D-printed parts and coloured seat belts to build 2 seats...
US$10.93
17 % OFF
US$9.03