Model Planes

Paint Mask:Preparing the masks: Masks should not be stretched during the application process as they are flexible and this could cause deformation. Remove the whole mask if necessary, and then apply again. Once placed on the model, the mask surface should be adjusted to the surface of the model ..

Paint Mask:Preparing the masks: Masks should not be stretched during the application process as they are flexible and this could cause deformation. Remove the whole mask if necessary, and then apply again. Once placed on the model, the mask surface should be adjusted to the surface of the model ..

This set consists of two complete sets of stencils for Spitfires Mk VII through 24 and Seafires Mk XV through 47. Some factories retained the older stencil style into later marks. Includes cockpit door stencils and bomb markings. These are very thin and beautifully printed by Cartograf, and replace ..

This set consists of new resin main wheels for Ta-152H and some later production Ta-152Cs. They feature detailed tires with fine tire beading, logo and data, and accurate hub detail with molded in front hub brake cables. A big and easy detail upgrade for your Aoshima, Dragon or other Ta-152 kits. De..

This set consists of a pair of accurately shaped, thin, distortion free, vacform sliding hoods to model an open canopy for your Spitfires. If you want to display your Spitfire with the canopy slid back, a vac hood will dramatically improve the look, as kit canopies are thick and will not fit over th..

This set consists of two super detailed resin main wheels with accurate hub and brake detail, petite tire logo and data detail, as fitted to the P-36, Hawk 81A. P-40B/C and RAF Tomahawk. A simple upgrade for Airfix, AML, Academy and Trumpeter kits...

Super detailed resin mainwheels with accurately proportioned 8 slot cast hub. Internal hub detail is visible through the slots! Features diamond tread tires as fitted to many F6Fs and F4Us in WWII and after. A simple upgrade for all Corsair and Hellcat kits...

This set contains 8 drop fit replacement exhaust inserts for the early Shackletons, before the exhaust pipes were fitted to route the exhaust under the wing. The exhausts are hollowed out for a more authentic look and have fastener detail not present on the kit parts...

F4U Corsair is a famous carrier-based fighter aircraft deployed by U.S. Navy in WWII. With the first prototype manufactured in 1940 and final variant produced in 1953, it has the longest production run of any U.S. piston-engined fighters. F4U is a single-seat, single-engine and inverted "gull wing" ..

This set includes two resin cast vertical F.24 camera faces, and one oblique F.24 camera (front and back inserts) for all PR/FR Spitfires and other RAF, FAA aircraft. Add some visible detail through the clear camera ports by replicating the front face of the cameras within. Quick and easy!..

The set is designed for the superb Eduard MiG-21 series. The kit radome is accurate and well molded. The separate radome and bulkhead allow you to assemble the fuselage without the radome, which is then installed when the model is almost finished. This will allow you to fill and sand the intake seam..

This is a plastic model kit, which comes unassembled and unpainted. So glue, model paints and other basic modelling tools are additionally required...

This set consists of a pair of detailed early style distributors and duplex-style ignition harness ring for F4U-1, and early F4U-1A Corsairs. This high pressure ignition system was prone to failure in flight and was replaced on later models by the style found in the kit. Stubs have pilot holes for d..

This set consists of an accurate one piece, seamless resin carburetor intake duct and shroud. It replaces the somewhat crude multi-part duct found in the otherwise very nice PCM Tempest V. Also fitted to many Typhoons and other Tempest V kits...

This set contains a new seamless resin supercharger intake, separate hollow cooling scoops and accurate and detailed exhausts with recessed openings to replace the kit items in the Revell G-10. Filling the seams inside the intake is a tricky and time consuming process. We have saved you from having ..

A pair of beautifully detailed open engine cowl flaps and two accurate one-piece radiator units, complete with plumbing and actuator mounting ring are contained in this set. A full set of cowl flap actuator rods with spares are also included. When installed, the open flaps reveal the detailed radiat..

This set consists of 4 superbly accurate and detailed resin mainwheels with authentic diamond tread that even replicates the narrower center row of diamonds. Wheels also feature fine raised tire beads and extremely fine raised tire size information. This set also features separate pressure fittings ..

Paint Mask:Preparing the masks: Masks should not be stretched during the application process as they are flexible and this could cause deformation. Remove the whole mask if necessary, and then apply again. Once placed on the model, the mask surface should be adjusted to the surface of the model ..

Contains airbrush paint masks:Basic MarkingsSeveral group numbers25 different instruction stencilsUser ManualPositioning InstructionsSUITABLE FOR AIRFIX 1/24..

This set is for Spitfire Mk Is and Vs fitted with machine guns only. If it has an eight-gun A-wing, this is the set for you. The spade grip features the round housing for the trigger, as well as an attached brake lever.This control column is offered in 3 versions. With and without gun camera but..

..

This is a plastic model kit, which comes unassembled and unpainted. So glue, model paints and other basic modelling tools are additionally required...

..