All Products

The Matra 155 pod for eighteen 68mm unguided rockets have been used with large number of military aircraft, both fixed-wing and helicopters, mainly of British, French or Israeli origin in service with many armies of the world. The Matra pods were carried under different types such as were for exampl..

Full resin kit of the British MB-2 fighter prototype. Except of the resin parts including variation of the tail planes the kit contains vacu-formed canopy and decals. MB-2 featured novel shapes, sophisticated design and production technologies. The aircraft was designed according to the F5/34 specif..

This is an all-resin cast construction kit of the aircraft tug vehicle that is currently operated by the German Bundeswehr. The kit is 3D designed and along the resin parts, it contains also clear styrene injected parts portraying the cabin windows, a decal sheet and full colour instructions...

High pressure air starter unit used for starting an aircraft jet engine by means of high velocity air generated by a small turbine inside the cart. The MA-1A cart was in service since the 1950s and and was used to start number of US jet engine aircraft such as the T-33A, T-38 and many others, but co..

Full resin kit of an amphibious tracked vehicle. Although initially designed as a combat and reconnaissance vehicle, it was mainly used to transport troops and cargo to other vehicles in the obstructed areas. Thanks to its low weight and wide belts Its capabilities were phenomenal. It was used in Eu..

The new Special Hobby models of the Kittyhawk IV (basically a P-40N with some British equipment), but not just these kits, will no doubt benefit from the new pilot's seat cast with the quite distinctive British Sutton harness. As many of our recent sets, also this one has been 3D designed and the ma..

This set contains all new cockpit parts for a model of arguably the best Japanese WW2 fighter plane. The detailed resin parts include a new cockpit floor, side consoles, pilot's seat, cockpit bulkheads, control column, rudder pedals and instrument panel. The set also offers a piece of acetate film w..

The set brings control surfaces such as the ailerons, rudder and elevators separated from tailplanes. All the surfaces come with much more detailed and real-like fabric covering than those in the original kit...

Detailed resin cockpit (with a floor, control column, pilot's seat with belts and an instrument panel) for the Special Hobby's model of the iconic Japanese Army Air Force WW2 fighter aeroplane. The instrument faces are pre-printed on a piece of clear film...

This set consists of the ailerons, tailplanes, elevators and the rudder and has been designed for the Special Hobby's model of the IJAAF WW2 fighter plane...

This set contains a resin pilot's seat with belts which easily replaces the original kit's part and offer higher levels of detail. Designed to fit Hasegawa's 1/72 Mitsubishi J2M3 Raiden (Jack) model..

This interior set fits the Hasegawa kit of the Mitsubishi J2M3 Raiden (Jack) fighter plane. The set offers high levels of detail on the cockpit sidewalls, floor, fuselage bulkheads, pilot's seat with belts, instrument panel and the fuel tank located forward of the panel, antenna mast mounted on the ..

..

The Martin company started a revolution in aircraft design with its bomber family B-10, B-12 and B-14, the designation varied because of the engines used. In the early 1930s when fabric-skinned biplanes ruled the skies, an all-metal monoplane suddenly appeared, with closed cockpits and engines compl..

The exquisite He 162A kit simply will only flourish with some more attention, even though the cockpit as it is now is more than busy. Why not use a resin cast hot seat then: A fret of photo etches comes along, too...

Splendidly detailed set which contains a new cockpit tub, control column, side consoles and instrument panels for Airfix model...

..

This detailed resin set brings the modeller a new cockpit tub, side consoles and a control column and also the Martin Baker Mk.9 hot seat with the safety harness. Tailored to fit the Airfix model...

Cast resin model of British experimental tailless aircraft developed during WW2. The HP. 75 Manx was built to evaluate flight characteristics for much larger tailless aircraft to be used as a military bomber. The plane flew with two types of engine cowlings and undercarriage legs. The model contains..

Full-resin model of 1930's British fighter prototype. Although Gloster F.5/34 offered quite good performance, production of Hurricanes and Spitfires started up faster. Two prototypes were test-flown until the mid of the war. The model consists of detailed cast resin parts, vacuum formed canopy, deca..

Set contains five figures of German Tank Crew dated 1944. The figures are intended to be placed into crew entry hatches therefore they're sculpted in half body configuration...

Set contains three figures of German Tank Crew dated 1944. The set contains complete standing figures...

Set contains new three sitting figures of WWII German Tank Crew...

The set comes with three figures of German WW2 soldiers servicing an A4/V2 launch platform...