All Products

A set of rivets with a bolt head design that can be used for detailing up various kits...

A set of rivets with a bolt head design that can be used for detailing up various kits...

A set of rivets with a bolt head design that can be used for detailing up various kits...

..

Highly detailed static plastic model Fine detailed multi disc wheels with sag Side and rear panels buildable in 2 different options (raised or lowered) Specific decalsheet included Drawbar and front axle fully movableThis kit was created in cooperation with Bolddivision...

This antenna set is made from fiberglass. You can freely cut, shave or paint it. Length: 60mm; Bottom diameter is 0.8mm and tip diameter is 0.3mm.This set can authentically reproduce the antenna part of the WWII German armoured vehicles...

Mittlerer Zugkraftwagen 8 t, Sonderkraftfahrzeug 7 - Highly detailed static plastic model - Realistic representation of 1943 production Sd.Kfz.7 - Ultra thin plastic parts for more realism - Complete interior - Including PE- & clear parts - With workable single track links - Four paint schemes & dec..

Highly detailed static plastic model Correct details for Bundeswehr and early Vietnam version PE parts included Please note: No Figures are included5 marking options: Bundeswehr, AmphTrsp/UBtl 2, early 1970s, Emden, GermanyUnsere Marine exhibition, early 1970s, Freiburg, GermanyUS Army, 165th Trans ..

Features: - Highly detailed static plastic model - Can be built as Einsatzkameratrupp or FuPers - Full interior - 4 decal options (Bundeswehr, ISAF, Irish & German UN (MINUSMA) - Clear parts included - Photo-etched parts includedThe GFF Eagle IV is a wheeled armoured vehicle that plays a significant..

Highly detailed static plastic model Accurate details of D version Parabolic mirror foldable as in real Radar unit traversable and elevatable Finest bolt details Dipol DE 62 additional antennae included..

Highly detailed static plastic model Completely new designed 8.8cm Flak Full interior including engine Ammo racks buildable open/closed 4 marking options..

Highly detailed static plastic model (1 of 3 versions) Detailed Cockpit Factory fuselage cradle Optional landing skid position 7 different marking options Bonus: Takeoff / Ground-handling trolleyEF-127 Walther 509C1 Motor EF-126 Single Argus EF-126 Double ArgusThe Das Werk Ef-126 / Ef-127 kit is des..

..

Contains parts for two red seat belt sets- This is a set of seatbelt parts that can be used for detail-up of car models. - The U.S. type is for 1/12 and 1/24, and the 2020type is for 1/20 and 1/24. [Black] and [Red] are lined up for 1/24scale 2020type. - Belt, photo-etched parts and shoulder sponsor..

Including ribbon, photo-etched parts, white metal buckles and shoulder pad decals..

This 1/20 scale pit parts set [1980's] allows you to recreate the F1 pit scene of the 1980s. - The set includes a handheld computer, batteries, tire carrier, bombe, intercom, timing board, handheld printer, impact wrench, pit stand,spray cans and oil can, and other equipment and tools to recreate pi..

..

..

It is the narrow rain type of tyres introduced into F1 since 1993. They are very suitable to reproduce the legendary 'rain race' of A.Senna MP4/8 in 1993 European GP.These tyres are made of urethane rubber. This pack includes 2x front tyres and 2x rear tyres. Mold of notes and manufacturer's logo on..

How-to:Preparing the masks: Masks should not be stretched during the application process as they are flexible and this could cause deformation. Remove the whole mask if necessary, and then apply again. Once placed on the model, the mask surface should be adjusted to the surface of the model by traci..

It is the GY rain type of tyres introduced into F1 between 1974 and 1978. They are suitable to reproduce the wet race scene of Type78, Type79, BT45, WR1 or M23.These tyres are made of urethane rubber. This pack includes 2x front tyres and 2x rear tyres. Mold of notes and manufacturer's logo on the s..

Product Details- Highly detailed static plastic model - Workable Winterketten tracks & suspension - Hatches can be built open & closed - Basic interior - PE parts included - Cable 7 marking optionsSturmgeschutz-Batterie 742, Northern Finland, 1943 Sturmgeschutz-Abteilung 189, Orel, Russia..

For DFV F1 engine for Tamiya's 1/12 kit..

rivet set designed for use with 1/12 scale motorcycle models made from 3D printing. includes 9 different head designs such as slot head screw, hexagon nut, torx head screw etc. which can be used freely to detail up the cowl/engine/frame etc. of a 1/12 scale motorcycle. one set comes with all 9 types..