All Products

1/12 scale replica of the screws used to close the hood on historic Bugatti. Made in resin by 3D printing, they reproduce in great detail these screws of such a special design, and the slot of their knob allows the use of a 0.2mm cable to reproduce the wire mesh that was used to secure the closure o..

Guide bushings for use on 1/12 scale brake discs. Enhance the realism of your brake discs with these bushings, which come separated into two parts, one of the pieces being the flat T-shaped outer bushing and the other being the inner nut. Made of resin using 3D printing, they reproduce all the detai..

Decals for completing the instrument panel of the Tamiya Brabham Ford BT44B with better definition and detail. These decals include the complete dials, as well as all the indications, labels and stickers for the different buttons and switches. A message has even been added that could sometimes be se..

Set of hood latches with pin for 1/12 scale models. Includes a total of 12 closures made of resin by 3D printing. It includes 4 different positions of the closure lock so that you can give more realism to your models, by not repeating the same configuration in all the closures.Family: Bonnet pins ..

This Decalcas reference includes fifty blade-type fuses and six 8-way fuse holder boxes with transparent cover at 1/12 scale, with all parts manufactured using 3D printing. Like the cover, the fuses are made of transparent resin, so you can easily give them that touch of realism by painting them in ..

Kit contains: - chain with sprockets (precut and ready for painting), - front sprocket screw (printed on sprocket), - set of rear sprocket nuts (printed on sprocket)...

Six battery master switches set casted in resin, perfect to be used with your scale kits in 1/12 scale.Family: Detail Scale: 1/12 Reference: DCL-PAR026 Item: Battery master switch Includes: resin parts and water slide decals Parts: 6 units..

Anderson-type connectors at 1/12 scale as those commonly used for the connection of battery chargers in competition cars and electrical power panels. Made in resin by 3D printing, they reproduce all the details, such as the "+" and "-" marks or the mounting nuts. In addition, they have holes so that..

Set of 24 inflation valves angled at 90, in 1:12 scale, produced using 3D printing, which faithfully reproduces this type of valves increasingly used in modern motorcycles. With the usual quality of Decalcas products, and the convenience of not requiring the use of primer, avoiding the loss of detai..

24 push buttons in scale 1/12 casted in resin, perfect to be used with cars and bikes.Family: Detail Scale: 1/12 Additional scales: 1/10 Reference: DCL-PAR025 Item: Push button Includes: resin parts Parts: 24 units..

Set of 500 button head hex socket screws with diameters of 1.0mm, 1.1mm, 1.2mm, 1.3mm and 1.4mm (100 units of each of the different sizes), with which to detail any part or piece of your models where these types of screws are found. Family: Fasteners Reference: DCL-PAR075 Item: Button head hex socke..

Set of 600 button head hex socket screws with diameters of 0.4mm, 0.5mm, 0.6mm, 0.7mm, 0.8mm and 0.9mm (100 units of each of the different sizes), with which to detail any part or piece of your models where these types of screws are found.Family: Rivets Reference: DCL-PAR074 Item: Button head hex ..

Very Good Quality..

This brush has synthetic bristles in a triangular shape.The ferrule is flat like a normal flat brush, but on one side the hairs are much longer than on the other side.It allows a large amount of paint to be loaded and more random marks to be made.The triangular shape and fine tip are also very..

Our Waterborne polymer primer is available in a Black color that is perfect for use as a basis for any dark color such fantasy miniatures, figures of vehicles. Its superb adhesion qualities combined with a matt-satin finish make our primer the perfect choice for preparing models for painting. Only ..

#NOTE: The set does NOT include a model kit...

The kit is brand new and boxed Constructed very detailed Consists entirely of Resin..

This kit is to replace the driving compartment of Bronco kit 35004/35005 and Trumpeter kit 00353/00354 It includes: A highly detail transmission with switchboard and various controls. The steering brake is faithfully reproduced with the perforated cover on the left side With 8 resin parts and intric..

Weathering pencils are water-based pencils with 17cm semi-grease paint specially for use in modelling. Specially formulated with the most suitable basic colours to achieve all the effects in a very simple way. They are very easy to control, clean, and of course they are not toxic. It is an ideal too..

High quality Nylon-type Flock with 2mm long fibers (perfect for 25-35mm and larger scales).Artificial or static grass is one of the most commonly used products in any modeling genre.This color is perfect for summer sceneries and battle boards.Different colors may be mixed to obtain a fin..

Tamiya Enamel Paints are used for brush or spray painting, and can be applied to almost any surface of wood, metal or plastic. Each bottle contains 10ml of paint, and when spray painting enamels, best results are achieved by adding 2 parts of thinner to 10 parts of paint.Note: Never apply lacquer ov..

This set contains 3 bottles of the newly designed liquid pigment formula, containing 3 different tones to reproduce different types of earth. Our liquid pigments can be applied straight from the bottle, directly onto the chosen areas of your model. Once they are dry, they have the same scale appeara..

..

..