All Products

The Boeing Chinook is a tandem-rotor helicopter developed by an American company and is now manufactured by Boeing Defense, Space & Security. The Chinook is a heavy-lift helicopter. Its name, is from the Native American Chinook people of Oregon and Washington state.This set includes only the camou..

This is a plastic model kit, which comes unassembled and unpainted. So glue, model paints and other basic modelling tools are additionally required...

Set contains resin wheels and paint mask for B-59 Superfortres kit..

** This model kit is supplied in unassembled and unpainted plastic components. Please note that glue, model paints, and other basic modelling tools are required and sold separately...

From the F version onwards the use of the full Balkenkrauz was slowly reduced as the war went on. 850mm was used as a factory standard on most 109's, the white area being more pronounced on the fuselage and lower wing. The wing size was increased to 950mm and it is suspected that this was because on..

The Avro Vulcan (later Hawker Siddeley Vulcan) is a jet-powered tail-less delta wing high-altitude strategic bomber which was operated by the Royal Air Force (RAF) from 1956 until 1984. Aircraft manufacturer A.V. Roe and Company (Avro) designed the Vulcan in response to a need for a strategic long r..

The Avro Vulcan (later Hawker Siddeley Vulcan) is a jet-powered tail-less delta wing high-altitude strategic bomber which was operated by the Royal Air Force (RAF) from 1956 until 1984. Aircraft manufacturer A.V. Roe and Company (Avro) designed the Vulcan in response to a need for a strategic long r..

This model kit features the four-engine Avro Lancaster, undoubtedly the most famous of all heavy RAF bombers of World War II. From 1942 onwards, it formed the backbone of the night bomber offensives deep into Germany and gained fame for sinking the Tirpitz and destroying the Mohne and Eder dams.Sk..

This model kit features the ATF Dingo 1 armoured transport vehicle. The Dingo 1 provides maximum protection against mines and IEDs with its special V-shaped underbody. The mounting can be built with an MG 3, 40 mm grenade machine gun, or a 12.7 mm MG.Skill Level: 4 Length: 76 mm Width: 40 mm Heigh..

..

This is a plastic model kit, which comes unassembled and unpainted. So glue, model paints and other basic modelling tools are additionally required...

The Fairchild Republic A-10 Thunderbolt II is a single-seat, twin-turbofan, straight-wing, subsonic attack aircraft for the United States Air Force. In service from 1977, it is commonly referred to as the 'Warthog' or simply 'Hog'. The A-10 was designed to provide close air support to friendly groun..

Assemble Guide: This is a snap-together kit, no cement required. No painting required, but will look better when painted. OverviewSkill Level: 1Scale: 1/72Wingspan: 9-1/4"Length: 8-3/4"Parts: 36DescriptionThey say that beauty is in the eyes of the beholder, and A-10 pilots think their aircraft is th..

Super detailed 3D-print kit 4pcsProducts made in 3D are not assembled or painted, and there may be colour differences depending on the resin. #Caution: Never boil in hot water as it can cause damage. If the product is bent, using the heat of a hair dryer can help straighten it.Experience in remov..

Super detailed 3D-print kit 8pcsProducts made in 3D are not assembled or painted, and there may be colour differences depending on the resin. #Caution: Never boil in hot water as it can cause damage. If the product is bent, using the heat of a hair dryer can help straighten it.Experience in remov..

Super detailed 3D-print kit 8pcsProducts made in 3D are not assembled or painted, and there may be colour differences depending on the resin. #Caution: Never boil in hot water as it can cause damage. If the product is bent, using the heat of a hair dryer can help straighten it.Experience in remov..

Super detailed 3D-print kit 2pcsProducts made in 3D are not assembled or painted, and there may be colour differences depending on the resin. #Caution: Never boil in hot water as it can cause damage. If the product is bent, using the heat of a hair dryer can help straighten it.Experience in remov..

Super detailed 3D-print kit 2pcsProducts made in 3D are not assembled or painted, and there may be colour differences depending on the resin. #Caution: Never boil in hot water as it can cause damage. If the product is bent, using the heat of a hair dryer can help straighten it.Experience in remov..

Super detailed 3D-print kit for 1/700 Yamato 1945Products made in 3D are not assembled or painted, and there may be colour differences depending on the resin. #Caution: Never boil in hot water as it can cause damage. If the product is bent, using the heat of a hair dryer can help straighten it.Ex..

Super detailed 3D-print kit for 1/700 Yamato 1941Products made in 3D are not assembled or painted, and there may be colour differences depending on the resin. #Caution: Never boil in hot water as it can cause damage. If the product is bent, using the heat of a hair dryer can help straighten it.Ex..

Super detailed 3D-print kit for 1/700 Yamato 1945Products made in 3D are not assembled or painted, and there may be colour differences depending on the resin. #Caution: Never boil in hot water as it can cause damage. If the product is bent, using the heat of a hair dryer can help straighten it.Ex..

Super detailed 3D-print kit for 1/700 Yamato 1941Products made in 3D are not assembled or painted, and there may be colour differences depending on the resin. #Caution: Never boil in hot water as it can cause damage. If the product is bent, using the heat of a hair dryer can help straighten it.Ex..

Super detailed 3D-print kit for 1/700 Yamato (1941/1945 2in1) Products made in 3D are not assembled or painted, and there may be colour differences depending on the resin. #Caution: Never boil in hot water as it can cause damage. If the product is bent, using the heat of a hair dryer can help strai..

Super detailed 3D-print kit for 1/700 YamatoProducts made in 3D are not assembled or painted, and there may be colour differences depending on the resin. #Caution: Never boil in hot water as it can cause damage. If the product is bent, using the heat of a hair dryer can help straighten it.Experie..