All Products

This is a set of very fine-pitch saws recommended for use on plastic, wood and resin and even some soft metals. * The set does not include the knife handle. The set includes 6 saw blades: - 2 Curved saws - these can be run along a ruler like a "contour saw" (pictured below). Two sizes are included ..

Micro-Saw set (22 t/cm - 56 tpi)This is a set of fine-pitch saws recommended for use on plastic, wood and resin and even some soft metals.The set does not include the knife handle.The set includes 6 saw blades:* 2 Curved saws - these can be run along a ruler like a "contour saw" (see the 3rd photo ..

Use these strips to mask complex curves on compound-curve surfaces. This is ideal for masking radar domes, drop tanks, weapon stripes and even spirals on propeller spinners. The masking material is specially designed for use in airbrushing, will not lift paint, it is re-position able and flexible an..

Use these strips to mask complex curves on compound surfaces. The sheet contains 130 strips of 195 x 1 mm self adhesive material. The masking material is specially designed for use in airbrushing, will not lift paint, it is re-position able and flexible and is solvent-proof. The film is transparent ..

Honeycomb Radiator Mesh (30/10)This is a generic honeycomb radiator mesh suitable for scale 1/32 aircraft. It can be cut to size and used to replace plastic kit radiator parts that are often inaccurate or overscale. Unlike generic woven meshes, this will not unravel when cut.This radiator mesh can b..

This is a bending tool for photoetched parts. This can bend any commercially available photoetched parts up to a length of 5 cm (approx 2 in). Suitable for all scales and all types of modeling.This tool works on the same principle as the hinged bending brakes that can be found in many metal workshop..

Fine saw blade (24 t/cm - 58 tpi)This is a fine saw blade and is recommended for most model-related cuts. This blade can be used to cut plastic, wood and resin.This saw is inspired by the Japanese Ryoba traditional saws that have teeth on both edges of the blade with the teeth handed, respectively "..

This is a tool that can be used to cut many long items (such as rods or bars) to the same length. Ideal for cutting stanchions, masts, antennas, duckboards, fence posts, etc. The pre-set dimensions range from 0.5 mm to 30 mm in 0.5 mm increments. The cutting gauge is made of stainless steel...

Contour saw (16 t/cm - 40 tpi)This is a set of medium-pitch saws recommended for use on plastic, wood and resin and even some soft metals.The set does not include the knife handle.The set includes 5 saw blades:* 2 Curved saws - these can be run along a ruler as shown in the second photo above. Two ..

Bucksaw & Fine bladeFine saw blade (24 t/cm - 58 tpi)This saw consists of a saw blade that is tensioned and held from both ends, leaving the blade clear to cut through the material.The set contains two frets of photo-etched stainless steel, one containing the multi-part frame and one containing thre..

This is an attachment for the Flip-R5 folding tools. This is an expansion tool for the Flip-R5 (RB-T002)..

This is an attachment for the Flip-R5 folding tools. This is an expansion tool for the Flip-R5 (RB-T002)..

1/72 Scale RulerYou can use this tool to measure scale 1/72 models - you can measure parts or drawings directly in scale metres or feet. No calculations or conversion charts needed.The ruler is marked in centimetres/metres on one edge and inches/feet/yards on the other edge.The ruler is made from st..

1/48 Scale RulerYou can use this tool to measure scale 1/48 models - you can measure parts or drawings directly in scale metres or feet. No calculations or conversion charts needed.The ruler is marked in centimetres/metres on one edge and inches/feet/yards on the other edge.The ruler is made from st..

..

The set comes with unpainted resin parts...

This is a resin model kit, which comes unassembled and unpainted. So glue, model paints and other basic modelling tools are additionally required.Scale 1/350 Multimedia model kit of the L.E. Roisin (P51) Irish Naval Service OPV The set includes:- Resin parts - Photo-etched parts in bass and stainles..

Scale 1/350 model kit of the LE Eithne, P31, Irish Naval Service OPV - Resin parts - Photo-etched parts in stainless steel - Turned brass parts - Decals..

Scale 1/350 model kit of the Emer-Class Irish Naval Service OPV - Resin parts - Photo-etched parts in stainless steel - Turned brass parts - Decals for P21 L.E. Emer, P22 L.E. Aoife, P.23 L.E. Aisling and P62 of the Maltese Navy...

1/35 Scale RulerYou can use this tool to measure scale 1/35 models - you can measure parts or drawings directly in scale metres or feet. No calculations or conversion charts needed.The ruler is marked in centimetres/metres on one edge and inches/feet/yards on the other edge.The ruler is made from st..

This is the harness used on Imperial Japanese Army aircraft in World War 2. Suitable for all Imperial Japanese Army aircraft with the "Ki" prefix used during WW2. No painting needed (except for painting the red quick-release lever). Simply remove the pre-cut straps from the backing paper, glue the ..

Commonly used in: - Bristol F.2b (in conjunction with the Lewis Mk II, Set GAS13-32056, or alternative variation, i.e. Lewis RNAS Pattern, Set GAS15-32074). - RAF RE.8 (in conjunction with the Lewis Mk II, Set GAS13-32056, or alternative variation, i.e. Lewis RNAS Pattern, Set GAS15-32074). - AMC..

This is a complete set of radiators to replace the photo-etched parts provided in the Tamiya 1/32 F4U Corsair kit. The set contains the oil coolers. No modifications needed, these parts are direct replacements for the kit parts.The oil cooler parts are made of stainless steel and provide a finer an..

..