AMMO by Mig Jimenez 2039 Acrylic Type Arming Putty (20ml)

Acrylic putty specially designed to cover joints and defects on your models. It can be diluted or cleaned with water before drying and is very easy to apply with a brush. After drying for 24 hours, it can be sanded to obtain a smooth and very resistant surface ready for engraving and painting.
1 - When fitting the pieces of a model you will fid pieces that don't fi well, leaving grooves between them. To fil these gaps, simply use the Arming Putty Acrylic Type A.MIG-2039.
2 - With a round brush, extend the Arming Putty Acrylic Type A.MIG-2039 along the line of union until filing the empty space.
3 - While the filed gap is drying, remove the excess with a cotton swab moistened with Acrylic Thinner A.MIG-2000.
4 - Finally a revised punch was used to mark the joint and to remove the putty from the adjoining panel lines.
5 - Arming Putty Acrylic Type A.MIG-2039 can be diluted with water.
6 - This allows a more fled application, ideal for seems and joints that only need light filing.
7 - After removing the excess with a cotton swab moistened with Acrylic Thinner A.MIG-2000, you can check the fi and detect possible faults.