Echelon Fine Details AXT351002 1/35 Decals for Schwere Panzerabteilung 505 Tiger IIs
Type: water-slide decals
Finally, an "all-in-one" marking sheet that is aimed squarely at satisfying any s.Pz.Abt 505 Tiger II fans. The decals mentions Horst Kronke's Tiger "124", which featured a flat, cropped out Hans im Gluck image being fastened onto the front of the mantlet collar. The Hans im Gluck image are on the instruction sheet so modellers can carefully cut it out and use it right away.
How to apply water-slide decals:
1. Preparation: to achieve better result, a gloss or semi-gloss coat is very important. It will make a smooth layer which the decals will suction to and make it much easier to apply and set them.
2. Cut out the decal you need (do it on cutting mat)
3. Grab the decal with tweezers, place it on the surface of the water and leave it for about 20 seconds.
4. Remove the decal from the water and place it on paper towel to remove any excess water.
5. Apply decal solution to the part where the decal is to be placed.
6. Slide the decal off the backing paper on to the model. Using a paint brush or cotton bud is a good way to do this without damaging the decal.
7. Use the brush, knife or cotton bud to position the decal. Using your paper towel, gently dab the decal and soak up the excess water (decal softener is also recommended at this stage. After applying softener, the decal will suction to the part and flatten out smooth.)
8. When the decal is completely dry, give another coat of varnish or Klear/Future to seal it.
Finally, an "all-in-one" marking sheet that is aimed squarely at satisfying any s.Pz.Abt 505 Tiger II fans. The decals mentions Horst Kronke's Tiger "124", which featured a flat, cropped out Hans im Gluck image being fastened onto the front of the mantlet collar. The Hans im Gluck image are on the instruction sheet so modellers can carefully cut it out and use it right away.
How to apply water-slide decals:
1. Preparation: to achieve better result, a gloss or semi-gloss coat is very important. It will make a smooth layer which the decals will suction to and make it much easier to apply and set them.
2. Cut out the decal you need (do it on cutting mat)
3. Grab the decal with tweezers, place it on the surface of the water and leave it for about 20 seconds.
4. Remove the decal from the water and place it on paper towel to remove any excess water.
5. Apply decal solution to the part where the decal is to be placed.
6. Slide the decal off the backing paper on to the model. Using a paint brush or cotton bud is a good way to do this without damaging the decal.
7. Use the brush, knife or cotton bud to position the decal. Using your paper towel, gently dab the decal and soak up the excess water (decal softener is also recommended at this stage. After applying softener, the decal will suction to the part and flatten out smooth.)
8. When the decal is completely dry, give another coat of varnish or Klear/Future to seal it.
| General Info | |
| Scale | 1/35 |
| Type | Model Upgrade/Accessory |
| Subtype | Decals / Stickers |
- Stock: In Stock
- Reward Points: 20
- SKU: EC AXT351002
- 1pcs in Stock
Echelon Fine Details
MRP: US$16.84 Save: US$3.37
20% OFF
US$13.47
(excl. Tax)
"In-Stock" Really Means It
Combine Shipping & Save
SAME or Next day shipping*
There are no reviews
Maybe you can help? Many users will be grateful to you. And so are we.