Barracuda BC-32003 1/32 P-47 Thunderbolt Part 3 Decals
Out Of Stock
"Boise Bee" P-47D-1-RE, serial number 42-7890. 334th FS, 4th FG, 8th Air Force. Flown by Lt. Duane Beeson. Based at Debden, England, January, 1944. Finished in Olive Drab and Neutral Gray. Note early style cowl flaps and Curtiss Electric narrow blade
"Sleepy Jean III" P-47D-28-RA, Serial number 42-28641. 395th FS, 368th FG, 9th Air Force. Flown by Lt. Bill Wayland Based at St. Dizier, France. Spring of 1945. Wayland is credited with 4 victories; 2 Bf-109s and 2 Fw-190s. Polished but dirty natural metal finish with semi gloss red trim. Dark olive drab or faded black anti glare panel. Plain wheel hubs with red centers. Wing and centerline racks fitted. Dirt spattered lower rear fuselage. Curtiss paddle bladed prop. Note non standard star and bars on fuselage. Source: 9th Air Force in Color.
"Kansas Tornado II" P-47D-25-RE, serial number 42-26742. 510th FS, 405th FG, 9th Air Force. Flown by Capt. Howard Curran. Based at St. Dizier, France, Fall, 1944. Natural metal finish with dark blue nose ring and canopy frames. Note cutback cowl flaps and Curtiss Electric 13" paddle bladed propeller.
How to apply water-slide decals:
1. Preparation: to achieve better result, a gloss or semi-gloss coat is very important. It will make a smooth layer which the decals will suction to and make it much easier to apply and set them.
2. Cut out the decal you need (do it on cutting mat)
3. Grab the decal with tweezers, place it on the surface of the water and leave it for about 20 seconds.
4. Remove the decal from the water and place it on paper towel to remove any excess water.
5. Apply decal solution to the part where the decal is to be placed.
6. Slide the decal off the backing paper on to the model. Using a paint brush or cotton bud is a good way to do this without damaging the decal.
7. Use the brush, knife or cotton bud to position the decal. Using your paper towel, gently dab the decal and soak up the excess water (decal softner is also recommended at this stage. After applying softner, the decal will suction to the part and flatten out smooth.)
8. When the decal is completely dry, give another coat of varnish or Klear/Future to seal it.
"Sleepy Jean III" P-47D-28-RA, Serial number 42-28641. 395th FS, 368th FG, 9th Air Force. Flown by Lt. Bill Wayland Based at St. Dizier, France. Spring of 1945. Wayland is credited with 4 victories; 2 Bf-109s and 2 Fw-190s. Polished but dirty natural metal finish with semi gloss red trim. Dark olive drab or faded black anti glare panel. Plain wheel hubs with red centers. Wing and centerline racks fitted. Dirt spattered lower rear fuselage. Curtiss paddle bladed prop. Note non standard star and bars on fuselage. Source: 9th Air Force in Color.
"Kansas Tornado II" P-47D-25-RE, serial number 42-26742. 510th FS, 405th FG, 9th Air Force. Flown by Capt. Howard Curran. Based at St. Dizier, France, Fall, 1944. Natural metal finish with dark blue nose ring and canopy frames. Note cutback cowl flaps and Curtiss Electric 13" paddle bladed propeller.
How to apply water-slide decals:
1. Preparation: to achieve better result, a gloss or semi-gloss coat is very important. It will make a smooth layer which the decals will suction to and make it much easier to apply and set them.
2. Cut out the decal you need (do it on cutting mat)
3. Grab the decal with tweezers, place it on the surface of the water and leave it for about 20 seconds.
4. Remove the decal from the water and place it on paper towel to remove any excess water.
5. Apply decal solution to the part where the decal is to be placed.
6. Slide the decal off the backing paper on to the model. Using a paint brush or cotton bud is a good way to do this without damaging the decal.
7. Use the brush, knife or cotton bud to position the decal. Using your paper towel, gently dab the decal and soak up the excess water (decal softner is also recommended at this stage. After applying softner, the decal will suction to the part and flatten out smooth.)
8. When the decal is completely dry, give another coat of varnish or Klear/Future to seal it.
| General Info | |
| Scale | 1/32 |
| Type | Model Upgrade/Accessory |
| Subtype | Decals / Stickers |
- Stock: Out Of Stock
- Reward Points: 14
- SKU: BAR BC-32003
Barracuda
MRP: US$11.14 Save: US$1.96
17% OFF
US$9.17
(excl. Tax)
"In-Stock" Really Means It
Combine Shipping & Save
SAME or Next day shipping*
There are no reviews
Maybe you can help? Many users will be grateful to you. And so are we.