Print Scale 72-008 1/72 Mig-17 " Fresco" Decals
Out Of Stock
Type: water-slide decals
1. MiG-17. Has been exposed in Kiev, 70.
2. MiG-17F. The participant intrusion into Czechoslovakia in 1968. The non-standard four-unit board number.
3. Mig-17 PF of 146th Guard Air Regiment of USSR Air Defence. Vasilkov,1957
4. Lim-6bis - the Polish version MiG-17F, adapted for land attacks. Planes had additional wings pylons and the parachute container in the basis kill.
5. MiG-17PF, Indonesian AF.
6. Forca Aerea de Mosambique have received 23 MiG-17 from GDR in 1980 year. By the plane ?board 21? deserted on July, 8th, 1981 to Southern Africa.
7. MiG-17F. One of two instant grasped by Israel on August 12th, 1968.
8. MiG-17F the senior lieutenant Nguen Van Baja from structure of 923rd fighter squadron of the Air Forces of Democratic Republic of Vietnam.June, 1966.
9. MiG-17F, the Air Forces of the North Korea. The middle 70.
10. MiG-17. Forca Aerea Popular de Angola - Defesa Anti-Aviones. Were actively used in northen and the central Angola 1975.
11. MiG-17F, Royal aircraft of khmers. The plane was used to 1970.
12. MiG-17F, the participant of war of 1967.
How to apply water-slide decals:
1. Preparation: to achieve better result, a gloss or semi-gloss coat is very important. It will make a smooth layer which the decals will suction to and make it much easier to apply and set them.
2. Cut out the decal you need (do it on cutting mat)
3. Grab the decal with tweezers, place it on the surface of the water and leave it for about 20 seconds.
4. Remove the decal from the water and place it on paper towel to remove any excess water.
5. Apply decal solution to the part where the decal is to be placed.
6. Slide the decal off the backing paper on to the model. Using a paint brush or cotton bud is a good way to do this without damaging the decal.
7. Use the brush, knife or cotton bud to position the decal. Using your paper towel, gently dab the decal and soak up the excess water (decal softner is also recommended at this stage. After applying softner, the decal will suction to the part and flatten out smooth.)
8. When the decal is completely dry, give another coat of varnish or Klear/Future to seal it.
1. MiG-17. Has been exposed in Kiev, 70.
2. MiG-17F. The participant intrusion into Czechoslovakia in 1968. The non-standard four-unit board number.
3. Mig-17 PF of 146th Guard Air Regiment of USSR Air Defence. Vasilkov,1957
4. Lim-6bis - the Polish version MiG-17F, adapted for land attacks. Planes had additional wings pylons and the parachute container in the basis kill.
5. MiG-17PF, Indonesian AF.
6. Forca Aerea de Mosambique have received 23 MiG-17 from GDR in 1980 year. By the plane ?board 21? deserted on July, 8th, 1981 to Southern Africa.
7. MiG-17F. One of two instant grasped by Israel on August 12th, 1968.
8. MiG-17F the senior lieutenant Nguen Van Baja from structure of 923rd fighter squadron of the Air Forces of Democratic Republic of Vietnam.June, 1966.
9. MiG-17F, the Air Forces of the North Korea. The middle 70.
10. MiG-17. Forca Aerea Popular de Angola - Defesa Anti-Aviones. Were actively used in northen and the central Angola 1975.
11. MiG-17F, Royal aircraft of khmers. The plane was used to 1970.
12. MiG-17F, the participant of war of 1967.
How to apply water-slide decals:
1. Preparation: to achieve better result, a gloss or semi-gloss coat is very important. It will make a smooth layer which the decals will suction to and make it much easier to apply and set them.
2. Cut out the decal you need (do it on cutting mat)
3. Grab the decal with tweezers, place it on the surface of the water and leave it for about 20 seconds.
4. Remove the decal from the water and place it on paper towel to remove any excess water.
5. Apply decal solution to the part where the decal is to be placed.
6. Slide the decal off the backing paper on to the model. Using a paint brush or cotton bud is a good way to do this without damaging the decal.
7. Use the brush, knife or cotton bud to position the decal. Using your paper towel, gently dab the decal and soak up the excess water (decal softner is also recommended at this stage. After applying softner, the decal will suction to the part and flatten out smooth.)
8. When the decal is completely dry, give another coat of varnish or Klear/Future to seal it.
| General Info | |
| Scale | 1/72 |
| Type | Model Upgrade/Accessory |
| Subtype | Decals / Stickers |
- Stock: Out Of Stock
- Reward Points: 20
- SKU: PRS72-008
Print Scale
MRP: US$16.17 Save: US$2.97
18% OFF
US$13.19
(excl. Tax)
"In-Stock" Really Means It
Combine Shipping & Save
SAME or Next day shipping*
There are no reviews
Maybe you can help? Many users will be grateful to you. And so are we.