Print Scale 72-120 1/72 Boulton Paul Defiant Decals
Out Of Stock
Type: Water-slide decals
1. Boulton Paul Defiant F.Mk.I, L7009/TW-H, flown by Flt Lt I.D.G. Donald No.141 Squadron, shot down by Bf.109Es on 19 July 1940 near Dover.
2. Boulton Paul Defiant F.Mk.I, N1801/PS-B flown by Frederick Hughes of No.264 Squadron,mid-1940.
3. Defiant Prototype K8310 in its revised form 1937.
4. Defiant F Mk I, L6950,first production aircraft during trials at A&AEE, Boscombe Down, September 1939.
5. Defiant F Mk I, N3437/EW-K, No.307 Squadron, Kirton-in-Lindsey, September 1940.
6. Defiant F Mk I, N1572/KO-I, No.2 Squadron, Clifton, September 1940.
7. Defiant F Mk I, N3313/PS-P, No. 264 Squadron, 1941.
8. Defiant F Mk I, N3328/DZ-Z, No. 151 Squadron, early 1941.
9. Defiant F Mk I, V1123/RA-R, No 410 (RCAF) Squadron, 1941.
10. Defiant F.Mk.I, N3340/YD-D, No.255 Squadron, Kirton-in-Lindsey, March 1941.
11. Defiant F Mk I, L7011/KJ-A,Gunnery Training and Fighter Affiliation Duties No.11 OTU, November 1942.
How to apply water-slide decals:
1. Preparation: to achieve better result, a gloss or semi-gloss coat is very important. It will make a smooth layer which the decals will suction to and make it much easier to apply and set them.
2. Cut out the decal you need (do it on cutting mat)
3. Grab the decal with tweezers, place it on the surface of the water and leave it for about 20 seconds.
4. Remove the decal from the water and place it on paper towel to remove any excess water.
5. Apply decal solution to the part where the decal is to be placed.
6. Slide the decal off the backing paper on to the model. Using a paint brush or cotton bud is a good way to do this without damaging the decal.
7. Use the brush, knife or cotton bud to position the decal. Using your paper towel, gently dab the decal and soak up the excess water (decal softner is also recommended at this stage. After applying softner, the decal will suction to the part and flatten out smooth.)
8. When the decal is completely dry, give another coat of varnish or Klear/Future to seal it.
1. Boulton Paul Defiant F.Mk.I, L7009/TW-H, flown by Flt Lt I.D.G. Donald No.141 Squadron, shot down by Bf.109Es on 19 July 1940 near Dover.
2. Boulton Paul Defiant F.Mk.I, N1801/PS-B flown by Frederick Hughes of No.264 Squadron,mid-1940.
3. Defiant Prototype K8310 in its revised form 1937.
4. Defiant F Mk I, L6950,first production aircraft during trials at A&AEE, Boscombe Down, September 1939.
5. Defiant F Mk I, N3437/EW-K, No.307 Squadron, Kirton-in-Lindsey, September 1940.
6. Defiant F Mk I, N1572/KO-I, No.2 Squadron, Clifton, September 1940.
7. Defiant F Mk I, N3313/PS-P, No. 264 Squadron, 1941.
8. Defiant F Mk I, N3328/DZ-Z, No. 151 Squadron, early 1941.
9. Defiant F Mk I, V1123/RA-R, No 410 (RCAF) Squadron, 1941.
10. Defiant F.Mk.I, N3340/YD-D, No.255 Squadron, Kirton-in-Lindsey, March 1941.
11. Defiant F Mk I, L7011/KJ-A,Gunnery Training and Fighter Affiliation Duties No.11 OTU, November 1942.
How to apply water-slide decals:
1. Preparation: to achieve better result, a gloss or semi-gloss coat is very important. It will make a smooth layer which the decals will suction to and make it much easier to apply and set them.
2. Cut out the decal you need (do it on cutting mat)
3. Grab the decal with tweezers, place it on the surface of the water and leave it for about 20 seconds.
4. Remove the decal from the water and place it on paper towel to remove any excess water.
5. Apply decal solution to the part where the decal is to be placed.
6. Slide the decal off the backing paper on to the model. Using a paint brush or cotton bud is a good way to do this without damaging the decal.
7. Use the brush, knife or cotton bud to position the decal. Using your paper towel, gently dab the decal and soak up the excess water (decal softner is also recommended at this stage. After applying softner, the decal will suction to the part and flatten out smooth.)
8. When the decal is completely dry, give another coat of varnish or Klear/Future to seal it.
| General Info | |
| Scale | 1/72 |
| Type | Model Upgrade/Accessory |
| Subtype | Decals / Stickers |
- Stock: Out Of Stock
- Reward Points: 20
- SKU: PRS72-120
Print Scale
MRP: US$18.68 Save: US$5.10
27% OFF
US$13.58
(excl. Tax)
"In-Stock" Really Means It
Combine Shipping & Save
SAME or Next day shipping*
There are no reviews
Maybe you can help? Many users will be grateful to you. And so are we.