Zoukei Mura SWS09 1/32 North-American P-51D/K Mustang IV

This is a plastic model kit, which comes unassembled and unpainted. So glue, model paints and other basic modelling tools are additionally required.
Model Features:
- 2-colour molded parts, clear
- Total parts: 292
- Length: about 304mm
- Height: about 115mm
- Width: about 356mm
- Marking options:
4 marking sheets included (Mustang IV x 2 types, P-51 D Early Type x 1, P-51 K x 1)
*The after parts for the P-51D kit can be used.
Model Details:
1. Auxiliary Intakes
3 kinds of detailed auxiliary intakes carefully and individually built are enclosed. Auxiliary intakes have been fixed behind the intakes used for the carburettor under the nose. Some filters have been placed inside in order to prevent the plane from debris when being on an accidental runway. There are 3 different types of shape for this panel: one with 32 round holes, the "close" type panel, and the shark panel seen on the RAF Mustang IV.
2. Propellers
From Hamilton Standard and Aero Products: a set of 2 different propellers! Enjoy the difference between the Hamilton Standard propellers with a hollow steel cuff, and the Aero Products propellers made in solid aluminium to make them lighter. Both types are reproduced thanks to thorough investigations.
3. Tail Wing
The Mustang left and right horizontal stabilizers have been made as 1 single part, and were designed to improve the productivity since right and left flippers are common. Then, regarding the fixation to the fuselage, a unique method of fixation was employed. Moreover, the vertical stabilizer deals with the engine torque, so an offset of 1 degree from the central axis of the fuselage was applied!
4. Marking
a. Mustang IV a,112 Sqn RAF,KH774
b. Mustang IV a,3 Sqn RAAF,KH716
c. P-51 K-10-NT Sr. No.44-12073 348th FS "Sunshine VII"
d. P-51 D-5-NA Sr. No.44-13410 361st FG "Lou IV"