Print Scale 72-328 1/72 Bristol Beaufort Part.2 Decals (RAAF included)
Water-slide Decals:
Instruction:
1. Preparation: to achieve better result, a gloss or semi-gloss coat is very important. It will make a smooth layer which the decals will suction to and make it much easier to apply and set them.
2. Cut out the decal you need (do it on cutting mat)
3. Grab the decal with tweezers, place it on the surface of the water and leave it for about 20 seconds.
4. Remove the decal from the water and place it on paper towel to remove any excess water.
5. Apply decal solution to the part where the decal is to be placed.
6. Slide the decal off the backing paper on to the model. Using a paint brush or cotton bud is a good way to do this without damaging the decal.
7. Use the brush, knife or cotton bud to position the decal. Using your paper towel, gently dab the decal and soak up the excess water (decal softener is also recommended at this stage. After applying softener, the decal will suction to the part and flatten out smooth.)
8. When the decal is completely dry, give another coat of varnish or Klear/Future to seal it.
1. Bristol Beaufort Mk ll T9540,the first Beaufort assembled in Australia, Fisherman??s Bend, 1941. Type A scheme of Dark Green end Dark Earth over Aluminium lower surfaces.
2. Bristol Beaufort Mk V A9-66:66 of No. 1 OTU, RAAF, 1943. Type A scheme of Foliage Green and Earth Brown over Sky Blue lower surfaces. Note early RAF roundel and yellow codes.
3. Bristol Beaufort Mk V A9-27:B of No. 6 OTU, Jervis Bay, New South Wales April 1943. Type A scheme of Foliage Green and Earth Brown over Sky Blue lower surfaces. RAAF roundels in Dark Blue and white.
4. Bristol Beaufort Mk.Vlll A9-500:W-DD of No. 15 Squadron RAAF, Middleburd Island, New Guinea, 30 September 1945. Overall Foliage Green finish with codes in white. Serial numbers in Medium Grey. Wing shackles carry two 250lb bombs.
5. Bristol Beaufort Mk. Vl A9-75:G of 6 OTU, Nowra, New South Wales, Australia, November 1943. Type A finish of Foliage Green and Earth Brown over Sky Blue lower surfaces. Codes in white. Serial numbers in Medium Grey.
6. Bristol Beaufort Mk. Vlll A9-632: T
Instruction:
1. Preparation: to achieve better result, a gloss or semi-gloss coat is very important. It will make a smooth layer which the decals will suction to and make it much easier to apply and set them.
2. Cut out the decal you need (do it on cutting mat)
3. Grab the decal with tweezers, place it on the surface of the water and leave it for about 20 seconds.
4. Remove the decal from the water and place it on paper towel to remove any excess water.
5. Apply decal solution to the part where the decal is to be placed.
6. Slide the decal off the backing paper on to the model. Using a paint brush or cotton bud is a good way to do this without damaging the decal.
7. Use the brush, knife or cotton bud to position the decal. Using your paper towel, gently dab the decal and soak up the excess water (decal softener is also recommended at this stage. After applying softener, the decal will suction to the part and flatten out smooth.)
8. When the decal is completely dry, give another coat of varnish or Klear/Future to seal it.
1. Bristol Beaufort Mk ll T9540,the first Beaufort assembled in Australia, Fisherman??s Bend, 1941. Type A scheme of Dark Green end Dark Earth over Aluminium lower surfaces.
2. Bristol Beaufort Mk V A9-66:66 of No. 1 OTU, RAAF, 1943. Type A scheme of Foliage Green and Earth Brown over Sky Blue lower surfaces. Note early RAF roundel and yellow codes.
3. Bristol Beaufort Mk V A9-27:B of No. 6 OTU, Jervis Bay, New South Wales April 1943. Type A scheme of Foliage Green and Earth Brown over Sky Blue lower surfaces. RAAF roundels in Dark Blue and white.
4. Bristol Beaufort Mk.Vlll A9-500:W-DD of No. 15 Squadron RAAF, Middleburd Island, New Guinea, 30 September 1945. Overall Foliage Green finish with codes in white. Serial numbers in Medium Grey. Wing shackles carry two 250lb bombs.
5. Bristol Beaufort Mk. Vl A9-75:G of 6 OTU, Nowra, New South Wales, Australia, November 1943. Type A finish of Foliage Green and Earth Brown over Sky Blue lower surfaces. Codes in white. Serial numbers in Medium Grey.
6. Bristol Beaufort Mk. Vlll A9-632: T
General Info | |
Scale | 1/72 |
Type | Model Upgrade/Accessory |
Subtype | Decals / Stickers |
- Stock: Out Of Stock
- Reward Points: 22
- SKU: PRS72-328
Print Scale
MRP: US$18.68 Save: US$3.59
19% OFF
US$15.09
(excl. Tax)
"In-Stock" Really Means It
Combine Shipping & Save
SAME or Next day shipping*
There are no reviews
Maybe you can help? Many users will be grateful to you. And so are we.