Zero Paints 3007 Etch Primer for Metal/Resin (60ml Etch Primer & 60ml Hardener)

For more info about Zero paints, please read Zero Paints Colour Description.pdf
Two pack anti-corrosive Grey Etching Primer for Metal and Resin (Suitable for White Metal, Resin and Photoetched Parts)
Contents: 60ml Etch Primer and 60ml Hardener supplied in Glass Jars.
Spray Application.
Mixing ratio by volume
Primer (Grey Liquid) 60 ml to Hardener 60 ml (ONLY MIX WHAT YOU REQUIRE EACHH TIME)
Prepare the mixture in a plastic beaker DO NOT USE metallic containers. Once mixed Pot-life is 24 hours 20 C
Drying Time
Air drying at 20 C: - Dust free: 8 - 10 min. - Handling: 20 min. - Through drying: 60 min.
If required sand using 3600 grade or higher Micromesh or Ultra Fine Scotch Brite Pads Once applied thoroughly clean your Airbrush A.S.A.P. as the Primer will damage your Airbrush if left.
Characteristics
Excellent adhesion on Iron, Steel, Aluminium and White Metal, Light Alloys, Zinc-coated Metal and Stainless Steel, Good covering power, Fast drying, Chromate-free and lead free
Health and Safety Notes :
Highly flammable. Irritating to eyes and s

Please Note: During 2020/2021 Zero Paint has struggled to get the glass bottles they have used years. Now they have swapped to PET plastic bottles after testing. Despite the obvious difference in the visual size, the new and old bottles have exactly the same capacity.